TORQUE CONVERTER GP 2267614 - Caterpillar

2267614 TORQUE CONVERTER GP Caterpillar parts D10T

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA2267614
226-7614
2267614

Weight: 914 pounds 414 kg.

Buy TORQUE CONVERTER GP 2267614 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Related part:

2267614 TC GP-W/HSG 10R5295 R

This part in 3 request: Show. This information for suppliers only!

#1397282 2267614

2024-07-30

#1047381 226-7614

2023-01-26

#904492 2267614

2022-06-14

Compatible equipment models: 2267614:

TRACK-TYPE TRACTOR D10T Caterpillar

Number on catalog scheme:

Caterpillar 2267614 Parts scheme TORQUE CONVERTER GP

For full view, you need register

Information:

Removal Procedure
Move the battery disconnect switch to the OFF position.
Disconnect the battery cable on the positive terminal of the battery. Move the battery cable away from the terminal.
Put identification marks on all harness assemblies and on all wires for installation purposes.
Illustration 1 g00787887
Remove nut (1). Remove ground strap (2) from the electric starting motor.
Illustration 2 g01272240
Raise the rubber boot and remove nut (3). Remove cable assemblies (4) from the electric starting motor.
Illustration 3 g01272243
Remove the small nut and cover (5). Remove harness assemblies (6) .
Remove bolt (7). Move bracket (8) to the side.
Illustration 4 g00886798
Typical example
Fasten a suitable lifting device to electric starting motor (10). The weight of electric starting motor (10) is approximately 29 kg (65 lb).
Remove bolts (9). Remove electric starting motor (10) from the flywheel housing.Installation Procedure
Illustration 5 g00886798
Fasten a suitable lifting device to electric starting motor (10). The weight of the electric starting motor is approximately 29 kg (65 lb).
Place electric starting motor (10) in the flywheel housing. Install bolts (9) .
Illustration 6 g01272243
Install bracket (8) in position. Secure bracket (8) with bolt (7) .
Install harness assemblies (6). Install cover (5). Secure cover (5) with small nut.
Illustration 7 g00787897
Install cable assemblies (4). Secure cable assemblies (4) with nut (3). Install the rubber boot on nut (3) .
Illustration 8 g00787887
Install ground strap (2). Secure ground strap (2) with nut (1) .
Connect the battery terminals.
Move the battery disconnect switch to the ON position.