TORQUE CONVERTER GP 2326208 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 154-6184 Forcing Bolt 4
B 138-7575 Link Bracket 2 Start By:
Remove the track roller frames. Refer to Disassembly and Assembly, "Track Roller Frame - Remove".
Illustration 1 g01353723
Remove two bolts and install Tooling (A), as shown. Remove remaining bolts (1).
Illustration 2 g01353743
Use Tooling (A) to separate pivot shaft (1) from the frame. Install Tooling (B) and a suitable lifting device to pivot shaft (1), as shown. The weight of pivot shaft (1) is approximately 47 kg (103 lb).
Remove pivot shaft (1). Remove Tooling (A) and Tooling (B).
Illustration 3 g01353777
Remove ring (2) from pivot shaft (1). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 154-6184 Forcing Bolt 2
B 138-7575 Link Bracket 2
Illustration 4 g01353777
Install ring (2) on pivot shaft (1).
Illustration 5 g01353912
Use Tooling (B) and a suitable lifting device to position pivot shaft (1). The weight of pivot shaft (1) is approximately 47 kg (103 lb).
Use Tooling (A) to align pivot shaft (1) against the frame.
Illustration 6 g01353723
Install bolts (1). Remove Tooling (A) and Tooling (B). Install the remaining two bolts (1). End By:
Install the track roller frames. Refer to Disassembly and Assembly, "Track Roller Frame - Install".