TORQUE CONVERTER AS 2934984 - Caterpillar

2934984 TORQUE CONVERTER AS Caterpillar parts 416E, 416F, 422E, 422F, 428E, 428F, 434E, 434F

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA2934984
293-4984
2934984

Weight: 39 pounds 17 kg.

Buy TORQUE CONVERTER AS 2934984 Caterpillar genuine, new aftermarket tractor parts with delivery
BACKHOE LOADER,

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

IEQFUE Torque Converter 212-6215 2934984 4568359 1407393 140-7393 268-1709 2681709 Compatible with Caterpillar Backhoe Loader 416C 416D 420D 424D 426C 428C 428D 430D 432D 436C 438C 438D 442D

$468.92

07 Oct 2025

CN: IEQFUE

IEQFUE Torque Converter 212-6215 2934984 4568359 1407393 140-7393 268-1709 2681709 Compatible with Caterpillar Backhoe Loader 416C 416D 420D 424D 426C 428C 428D 430D 432D 436C 438C 438D 442D
IEQFUE 【Part Name】Torque Converter || 【Part Number】212-6215 2934984 4568359 1407393 140-7393 268-1709 2681709 || 【Application Models For】Compatible with Caterpillar Backhoe Loader 416C 416D 420D 424D 426C 428C 428D 430D 432D 436C 438C 438D 442D

RONGPAS Torque Converter 2681709 1407393 2934984 2126215 4568359 compatible with Caterpillar CAT Backhoe Loader 416C 416D 420D 424D 426C 428C 428D 430D 432D 436C 438C 438D 442D

$475.00

04 Mar 2025

CN: RONGPAS

RONGPAS Torque Converter 2681709 1407393 2934984 2126215 4568359 compatible with Caterpillar CAT Backhoe Loader 416C 416D 420D 424D 426C 428C 428D 430D 432D 436C 438C 438D 442D
RONGPAS Part Number: 2681709 1407393 2934984 2126215 4568359 || 2681709 1407393 2934984 2126215 4568359 Torque Converter || Compatible with Caterpillar Backhoe Loader 414E 416E 420E || Compatible with Caterpillar Backhoe Loader 416F 422E 422F 428E 428F 434E 434F 424B 424B HD 432E || Compatible with Caterpillar Backhoe Loader 416C 416D 420D 424D 426C 428C 428D 430D 432D 436C 438C 438D 442D

$445.00

09 Dec 2024

CN: IEQFUE

This part in 1 request: Show. This information for suppliers only!

#672952 2934984

2021-06-22

For full view, you need register

Compatible equipment models: 2934984:

BACKHOE LOADER 416E 416F 422E 422F 428E 428F 434E 434F Caterpillar

Information:

Illustration 1 g00642378
(1) Wheel. (2) Hub. (3) Bolts. (4) Retainer. (5) Shims. (6) Housing.This procedure requires a 25 to 50 mm (1 to 2 inch) outside micrometer and a depth micrometer that has 50 mm (2 inch) of travel.Note: Perform this procedure while the wheel is on the machine. The tire and the rim must be removed.
Measure the thickness of retainer (4) with the outside micrometer. Measure the retainer at three places near the small gauge holes. Record the average of these three measurements.
Assemble the seal group in spindle (6) and in wheel (1). Apply oil on the wheel bearings. Install the wheel bearings and the wheel on the spindle.
Illustration 2 g00642381
Bolt Tightening Sequence
Install hub (2) on the spindle. Apply oil to the threads of three bolts (3) and use the bolts to install retainer (4) without shims. Install three bolts (3) finger tight in the locations that are shown in illustration 2.
Tighten bolts (3) in the retainer to a torque of 115 15 N m (80 10 lb ft). Tighten the bolts in the sequence that is shown in illustration 2.
Rotate the wheel for one revolution and tighten bolts (3) again to a torque of 115 15 N m (80 10 lb ft).
Loosen bolts (3) so that the wheel (1) can slide a slight amount downward on the wheel bearings.
Tighten bolts (3) to a torque of 20 7 N m (15 5 lb ft). Tighten bolts (3) in the sequence that is shown in illustration 2.
Rotate the wheel for one revolution and tighten bolts (4) again to a torque of 20 7 N m (15 5 lb ft).
To measure the distance from the retainer to the end of the spindle, use the depth micrometer. Measure the distance through the three small holes in the retainer.
Record the average of the three depth measurements. Determine the difference between the average thickness that was measured in Step 1 and the average depth that was measured in Step 9. The difference is the gap that is between the retainer and the end of the spindle.
Assemble shims (5) in order to obtain the same thickness that was determined in Step 10. This measurement is the thickness of shims (5) that must be installed.Note: The shims must be within 0.025 mm (.001 inch) of the thickness in Step 11.
Remove retainer (4). Install the necessary amount of shims (5) .
Install retainer (4) and bolts (3). Start at the top of the retainer. Torque the bolts evenly to 125 20 N m (92 15 lb ft). Torque bolts an additional 120 10°.