TORQUE CONVERTER & HOUSING GP 3465835 - Caterpillar

1. Fasten the differential to tooling (A) as shown.2. Make sure the O-ring seal is installed around the differential carrier and put clean oil on it. 3. Use tooling (A) and put the differential in position in the front axle housing. Two 3/4"-10 NC guide bolts (1) can be used to keep the differential in alignment. 4. Install bolts (2) and tighten them to a torque of 475 50 N m (350 37 lb.ft.). 5. Connect brake lines (3) and (4) to junction block (5). Remove (bleed) the air from the brake system.6. Fill the axle housing and final drives with clean oil after the axles are installed.end by:a) install axles (front)b) install front drive shaft