TORQUE CONVERTER GP 4627853 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     311-1362     Vacuum Cap     1    
B     138-7575     Link Bracket     2    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01429319
Use Tooling (B) and a suitable lifting device in order to install bank valve (14). The weight of bank valve (14) is approximately 73 kg (160 lb).
Illustration 2 g01429188
Illustration 3 g01429190
Install bolts (13) .
Illustration 4 g01429187
Position harness assembly (10) to support (12). Install bolts (11). Connect harness assembly (10).
Illustration 5 g01429174
Connect harness assemblies (7). Repeat this Step for the opposite side of the machine.
Connect tube assemblies (8) and (9) .
Illustration 6 g01429008
Connect tube assembly (6) .
Connect hose assemblies (4) .
Install tube assemblies (3) and (5) .
Repeat Steps 6 through 8 for the opposite side of the machine.
Illustration 7 g01429013
Position cover (2) and install bolts (1). Repeat this Step for the opposite side of the machine.
Illustration 8 g01392655
Remove Tooling (A) .
Fill the hydraulic tank. Refer to Operation and Maintenance Manual, "Capacities - Refill".