TRACK GP 1504762 - Caterpillar

Connection Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     1U-9760     Stand     2    
1U-9759 Stand     1    
B     4C-8161     Support Bracket     1    
4C-8162 Support Bracket     1    
8S-7615 Pin     4    
8S-7621 Tube     4    
8S-7630 Stand     2    
8S-7640 Stand     2    
8S-8048 Saddle     2    
C     138-7574     Link Bracket     1    
Illustration 1 g00375762
Check the condition of the O-ring seal on the torque converter housing. If the O-ring seal is worn or damaged, use a new part for replacement. Install the O-ring seal on the torque converter housing.
Illustration 2 g00375436
Note: Place the engine on Tooling (B), if necessary.
Illustration 3 g00375438
Attach Tooling (C) and a hoist to the transmission, the torque converter, and the transfer gears, as shown. Make sure that the unit is level. The weight of the transmission, torque converter, and transfer gears is 1045 kg (2300 lb).
Use the hoist to connect the engine to the torque converter.
Illustration 4 g00375437
Install twelve bolts (3) .
Illustration 5 g00375410
Temporarily place the engine, the torque converter, the transmission and the transfer gears on Tooling (A). The combined weight of the engine, of the torque converter, of the transmission and of the transfer gears is approximately 2315 kg (5100 lb).
Check the condition of the O-ring seals in tube assemblies (1) and (2). If the O-ring seals are worn or damaged, use new parts for replacement. Install the O-ring seals in tube assemblies (1) and (2) .
Connect tube assemblies (1) and (2) to the torque converter and the engine.End By: Install the engine, the torque converter, the transmission and the transfer gears. Refer to Disassembly and Assembly, "Engine, Torque Converter, Transmission and Output Transfer Gears - Install".