1764885 TRACK ADJUSTER & RECOIL GP Caterpillar parts
322C
Rating:
Alternative (cross code) number:
CA1764885
176-4885
1764885
CA1764885
176-4885
1764885
EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$708.52
06 Dec 2023
CZ: MROAUTO Autopar
Thermotec DASC001TT Intercooler
Thermo-Tec THERMOTEC Intercooler || This part corresponds to the original part in terms of performance. The quality of the spare part fully meets the requirements of the car manufacturers. || Intercooler, LLK: for 4 - series 94 L/300, for 4 - series 94 L/300, for 4 - series 94 L/300, for 4 - series 94 L/260, for 4 - series 94 L/260, for 4 - series 94 G/310, for 4 - series 94 G/310. 10, 10, for Series 94 G/310 || OE number: 1373517, 1373717, 1384059, 1408882, 1430718, 1477051, 1516492, 1510014, 1764885 || Please select your vehicle from the drop down list to check compatibility with the product.
Thermo-Tec THERMOTEC Intercooler || This part corresponds to the original part in terms of performance. The quality of the spare part fully meets the requirements of the car manufacturers. || Intercooler, LLK: for 4 - series 94 L/300, for 4 - series 94 L/300, for 4 - series 94 L/300, for 4 - series 94 L/260, for 4 - series 94 L/260, for 4 - series 94 G/310, for 4 - series 94 G/310. 10, 10, for Series 94 G/310 || OE number: 1373517, 1373717, 1384059, 1408882, 1430718, 1477051, 1516492, 1510014, 1764885 || Please select your vehicle from the drop down list to check compatibility with the product.
$616.37
13 Nov 2023
CZ: MROAUTO Autopar
Thermotec DASC001TT Intercooler
Thermo-Tec THERMOTEC Intercooler || This part corresponds to the original part in terms of performance. The quality of the spare part fully meets the requirements of the car manufacturers. || Intercooler, LLK: for 4 - series 94 L/300, for 4 - series 94 L/300, for 4 - series 94 L/300, for 4 - series 94 L/260, for 4 - series 94 L/260, for 4 - series 94 G/310, for 4 - series 94 G/310. 10, 10, for Series 94 G/310 || OE number: 1373517, 1373717, 1384059, 1408882, 1430718, 1477051, 1516492, 1510014, 1764885 || Please select your vehicle from the drop down list to check compatibility with the product.
Thermo-Tec THERMOTEC Intercooler || This part corresponds to the original part in terms of performance. The quality of the spare part fully meets the requirements of the car manufacturers. || Intercooler, LLK: for 4 - series 94 L/300, for 4 - series 94 L/300, for 4 - series 94 L/300, for 4 - series 94 L/260, for 4 - series 94 L/260, for 4 - series 94 G/310, for 4 - series 94 G/310. 10, 10, for Series 94 G/310 || OE number: 1373517, 1373717, 1384059, 1408882, 1430718, 1477051, 1516492, 1510014, 1764885 || Please select your vehicle from the drop down list to check compatibility with the product.
$613.70
08 Nov 2023
CZ: MROAUTO Autopar
Thermotec DASC001TT Intercooler
Thermo-Tec THERMOTEC Intercooler || This part corresponds to the original part in terms of performance. The quality of the spare part fully meets the requirements of the car manufacturers. || Intercooler, LLK: for 4 - series 94 L/300, for 4 - series 94 L/300, for 4 - series 94 L/300, for 4 - series 94 L/260, for 4 - series 94 L/260, for 4 - series 94 G/310, for 4 - series 94 G/310. 10, 10, for Series 94 G/310 || OE number: 1373517, 1373717, 1384059, 1408882, 1430718, 1477051, 1516492, 1510014, 1764885 || Please select your vehicle from the drop down list to check compatibility with the product.
Thermo-Tec THERMOTEC Intercooler || This part corresponds to the original part in terms of performance. The quality of the spare part fully meets the requirements of the car manufacturers. || Intercooler, LLK: for 4 - series 94 L/300, for 4 - series 94 L/300, for 4 - series 94 L/300, for 4 - series 94 L/260, for 4 - series 94 L/260, for 4 - series 94 G/310, for 4 - series 94 G/310. 10, 10, for Series 94 G/310 || OE number: 1373517, 1373717, 1384059, 1408882, 1430718, 1477051, 1516492, 1510014, 1764885 || Please select your vehicle from the drop down list to check compatibility with the product.
Number on catalog scheme:
1
For full view, you need register
Compatible equipment models: 1764885:
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0520 Driver Group 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that all components of the rear power take-off (RPTO) are clean and free from wear and damage.
Illustration 1 g02070454
Illustration 2 g02069024
If necessary, follow Steps 2.a through Steps 2.c in order to install the sleeve bearing from the flywheel housing.
Accurately align oil Holes (X) in sleeve bearing (20) with the oil holes in flywheel housing (9).
Use Tooling (A) in order to install sleeve bearing (20) into flywheel housing (9). Note: Ensure that the oil holes are correctly aligned. If the oil holes are not correctly aligned, the sleeve bearing should be removed.
Repeat Step 2.a through Steps 2.c in order to install sleeve bearing (21) to flywheel housing (9).
Illustration 3 g02070455
Illustration 4 g02069021
If necessary, follow Steps 3.a through Steps 3.d in order to install the sleeve bearing to the gears.
Place gear (17) onto suitable support.
Accurately align Grooves (Z) in sleeve bearing (20) with Grooves (Y) in gear (17).
Use Tooling (A) and a suitable press in order to install sleeve bearing (19) into gear (17).
Repeat Steps 3.a through Step 3.c in order to install the sleeve bearing to gear (18).
Lubricate idler hub (15) and gear (17) with clean oil. Install idler hub (15) to gear (17). Note: Ensure that the gear and the idler hub are correctly oriented.
Install gear (17) and idler hub (15) assembly to flywheel housing (9). Note: Ensure that the oil hole in the idler hub is correctly positioned.
Install bolts (13) to idler hub (15) and hand tighten bolts. Note: Ensure that the idler hub is correctly aligned to the flywheel housing.
Repeat Steps 4 through Step 6 in order to install gear (18), idler hub (16) and bolts (14) to flywheel housing (9).
Tighten bolts (13) and bolts (14) to a torque of 100 N m (74 lb ft).
Ensure that there is tactile backlash between gear (17) and gear (18). Ensure that there is end play between the idler hubs and the gears.
Illustration 5 g02069020
install gear assembly (11) and gear assembly (12) to flywheel housing (9).
Illustration 6 g02069019
Illustration 7 g02070473
If necessary, follow Steps 11.a through Steps 11.c in order to install the sleeve bearing to the adapter.
Place adapter (2) onto suitable support.
Use Tooling (A) and a suitable press in order to install sleeve bearing (10) into adapter (2).
Repeat Steps 11.a through Step 11.b in order to install the sleeve bearing into adapter (5).
Install a new O-ring seal (3) (not shown) to adapter (2).
Install adapter (2) to flywheel housing (9). Note: Ensure correct orientation of the adapter.
Install bolts (1) and tighten the bolts to a torque of 55 N m (41 lb ft).
Install a new O-ring seal (6) (not shown) to adapter (5).
Install adapter (5) to flywheel housing (9). Note: Ensure correct orientation of the adapter.
Install bolts (4) and tighten the bolts to a torque of 55 N m (41 lb ft).
Ensure that there is tactile backlash between the gears. Ensure that there is end play between the gears
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0520 Driver Group 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that all components of the rear power take-off (RPTO) are clean and free from wear and damage.
Illustration 1 g02070454
Illustration 2 g02069024
If necessary, follow Steps 2.a through Steps 2.c in order to install the sleeve bearing from the flywheel housing.
Accurately align oil Holes (X) in sleeve bearing (20) with the oil holes in flywheel housing (9).
Use Tooling (A) in order to install sleeve bearing (20) into flywheel housing (9). Note: Ensure that the oil holes are correctly aligned. If the oil holes are not correctly aligned, the sleeve bearing should be removed.
Repeat Step 2.a through Steps 2.c in order to install sleeve bearing (21) to flywheel housing (9).
Illustration 3 g02070455
Illustration 4 g02069021
If necessary, follow Steps 3.a through Steps 3.d in order to install the sleeve bearing to the gears.
Place gear (17) onto suitable support.
Accurately align Grooves (Z) in sleeve bearing (20) with Grooves (Y) in gear (17).
Use Tooling (A) and a suitable press in order to install sleeve bearing (19) into gear (17).
Repeat Steps 3.a through Step 3.c in order to install the sleeve bearing to gear (18).
Lubricate idler hub (15) and gear (17) with clean oil. Install idler hub (15) to gear (17). Note: Ensure that the gear and the idler hub are correctly oriented.
Install gear (17) and idler hub (15) assembly to flywheel housing (9). Note: Ensure that the oil hole in the idler hub is correctly positioned.
Install bolts (13) to idler hub (15) and hand tighten bolts. Note: Ensure that the idler hub is correctly aligned to the flywheel housing.
Repeat Steps 4 through Step 6 in order to install gear (18), idler hub (16) and bolts (14) to flywheel housing (9).
Tighten bolts (13) and bolts (14) to a torque of 100 N m (74 lb ft).
Ensure that there is tactile backlash between gear (17) and gear (18). Ensure that there is end play between the idler hubs and the gears.
Illustration 5 g02069020
install gear assembly (11) and gear assembly (12) to flywheel housing (9).
Illustration 6 g02069019
Illustration 7 g02070473
If necessary, follow Steps 11.a through Steps 11.c in order to install the sleeve bearing to the adapter.
Place adapter (2) onto suitable support.
Use Tooling (A) and a suitable press in order to install sleeve bearing (10) into adapter (2).
Repeat Steps 11.a through Step 11.b in order to install the sleeve bearing into adapter (5).
Install a new O-ring seal (3) (not shown) to adapter (2).
Install adapter (2) to flywheel housing (9). Note: Ensure correct orientation of the adapter.
Install bolts (1) and tighten the bolts to a torque of 55 N m (41 lb ft).
Install a new O-ring seal (6) (not shown) to adapter (5).
Install adapter (5) to flywheel housing (9). Note: Ensure correct orientation of the adapter.
Install bolts (4) and tighten the bolts to a torque of 55 N m (41 lb ft).
Ensure that there is tactile backlash between the gears. Ensure that there is end play between the gears
Caterpillar SIS machinery equipment:
Caterpillar SIS
322C & 322C L Excavators BKM00001-UP (MACHINE) POWERED BY 3126 Engine »
176-4885
TRACK ADJUSTER & RECOIL GP
322C & 322C LN EXCAVATORS BFK00001-UP (MACHINE) POWERED BY 3126 Engine »
176-4885
TRACK ADJUSTER & RECOIL GP
322C L Excavator BKJ00001-UP (MACHINE) POWERED BY 3126 Engine »
176-4885
TRACK ADJUSTER & RECOIL GP
322C & 322C L Excavators DAA00001-UP (MACHINE) POWERED BY 3126 Engine »
176-4885
TRACK ADJUSTER & RECOIL GP
322C L, 322C LN Hydraulic Excavators EMR00001-UP (MACHINE) POWERED BY 3126 Engine »
176-4885
TRACK ADJUSTER & RECOIL GP
322C L Hydraulic Excavator HEK00001-UP (MACHINE) POWERED BY 3126B Engine »
176-4885
TRACK ADJUSTER & RECOIL GP
Caterpillar parts catalog:
Parts track Caterpillar catalog:
1915068
TRACK GP
322B, 322C
322B, 322C
1915070
TRACK GP
322C
322C
1959347
TRACK GP
318C, 322B, 322C, 324D
318C, 322B, 322C, 324D
1959349
TRACK GP
322B, 322C, 324D, 324D L
322B, 322C, 324D, 324D L
1915233
TRACK GP
322C, 324D, 324D L, 324D LN
322C, 324D, 324D L, 324D LN
1959234
TRACK GP
322C
322C
1959236
TRACK GP
322C
322C
1961057
TRACK GP
322C
322C
1993011
TRACK GP
322C
322C
2660086
TRACK GP
D6R II
D6R II
322, 322 FM L, 322 LN, 322B L, 322B LN, OEMS
3503249
TRACK GP
345D L, 349D, 349D L
345D L, 349D, 349D L
3503254
TRACK GP
345D L, 349D, 349D L
345D L, 349D, 349D L
3Y3928
TRACK GROUP
955K, 955L
955K, 955L
2010635
TRACK GP
D6R, D6R II
D6R, D6R II
1452281
TRACK ADJUSTER & RECOIL GP
PM-201, PM-565, PM-565B
PM-201, PM-565, PM-565B
2564978
TRACK GP
D4C III, D4G
D4C III, D4G
6Y3596
TRACK GP
D5H
D5H
1V7226
TRACK GP
D4E
D4E
3997402
TRACK GP
D11T
D11T
6I9237
TRACK GP
D7E, D7H, D7R, D7R II
D7E, D7H, D7R, D7R II