TRACK GP 1880615 - Caterpillar

Dozer Blade Height
Float (1) - Push the lever all the way forward into detent for blade float. In this position, the blade will move up and down following the ground contour.The lever will remain in the float position (detent) until manually pulled out of detent position. The lever will then return to HOLD. Lower (2) Push the lever forward to lower the blade. Release the lever and it will return to HOLD. Hold (3) Release the lever from raise or lower, and it will return to HOLD. The blade movement will stop. Raise (4) Pull the lever back to raise the blade. Release the lever and it will return to HOLD.Dozer Blade Tilt And Angle
Tilt Left (1) Pull the lever to the left to lower the blade to the left. Release the lever and it will return to HOLD. Tilt Hold (2) Release the lever and it will return to HOLD. The blade movement will stop. Tilt Right (3) Push the lever to the right to lower the blade to the right. Release the lever and it will return to HOLD. Dozer Blade Angle (If Equipped)
Angle Left (1) Rotate the lever to the left, to angle the blade to the left. Angle Right (2) Rotate the lever to the right, to angle the blade to the right.Ripper
Raise (1) - Pull the lever to the left (towards the operator) to raise the ripper. Release the lever and it will return to HOLD. Hold (2) - Release the lever and it will return to HOLD. Ripper movement will stop. Lower (3) - Push the lever to the right (away from the operator) to lower the ripper. Release the lever and it will return to HOLD.Winch
Do not move the control lever to FREE SPOOL position with a load on the line. The load will be released uncontrolled and can result in personal injury or death.
Free Spool (1) - Push the button on top of control. Move the lever to this position to free the spool. Cable can now be pulled out by hand. Brake Off Detent (2) - The lever will remain in this position until moved manually. The resistance of the winch mechanism makes it impossible to unreel the cable by hand. Brake Off (3) - Move the lever to this position to release the winch brake. Release the lever and it will return to BRAKE ON. The cable will unreel by the weight of the load, or when the machine moves away from load, if it is heavy enough. Brake On (4) - The cable should not move. Use this position when towing, holding load or when winch is not in use. Reel In (5) - Move the lever to this position to reel in the cable. The cable should move toward the winch under