TRACK ADJUSTER & RECOIL GP 2134314 - Caterpillar

Illustration 3 g01206511
Attach Tooling (A) to accumulator cover (4). Loosen bolt (3) for approximately two turns in order to discharge accumulator body (2) .
Remove Tooling (A) .
Illustration 4 g01206513
Illustration 5 g01206515
Remove bolt (3) and seal washer (5) from accumulator cover (4) .
Use Tooling (B) in order to remove accumulator cover (4) from accumulator body (2) .
Illustration 6 g01206517
Remove diaphragm (6) from accumulator body (2) .
Illustration 7 g01206521
Illustration 8 g01206523
Remove pressure control valve (7) and spring (9) from valve body (8) .
Illustration 9 g01206525
Remove seal housing (10) from pressure control valve (7) .
Illustration 10 g01206526
Remove retainer (11), ring (12), O-ring seal (13), O-ring seal (14), and seal (15) from seal housing (10) .
Illustration 11 g01206557
Illustration 12 g01206561
Remove O-ring seals (16) from valve body (8) .
Remove bolts (17) in order to remove valve body (8) from piston actuator (18) .
Illustration 13 g01206527
Remove guide socket (19) and spool (21) from valve body (8) .
Remove O-ring seal (20) from guide socket (19) .
Remove spool socket (22) and O-ring seal (23) from valve body (8) .
Illustration 14 g01206529
Illustration 15 g01206530
Remove O-ring seal (24) and O-ring seals (25) from piston actuator (18) .
Remove piston (26) from piston actuator (18) .
Illustration 16 g01206532
Remove retaining ring (27) and lip seal (28) from piston actuator (18) .
Use Tooling (C) in order to remove retaining ring (29) .
Remove spacer (30) and seal (31) .