TRACK ROLLER FRAME GP-FRONT 2244121 - Caterpillar

Illustration 1 g00845563
(A) Bucket cylinder (B) Bucket control linkage (C) Bucket (D) Boom (E) Stick cylinderNote: All bores must be free of paint. Coat all bores for pins with lubricant. (1) Two 172-3024 Pin Assemblies Diameter after plating ... 129.85 0.04 mm (5.112 0.002 inch) Minimum thickness for plating ... 0.005 mm (0.0002 inch) Bore diameter for pin. ... 130.050 0.050 mm (5.1201 0.0020 inch) (2) Use the necessary shims to adjust the lateral clearance. Maximum clearance ... 1.0 mm (0.04 inch) 151-0653 Shim thickness ... 0.5 mm (0.02 inch) 093-0076 Shim thickness ... 1.0 mm (0.04 inch) 093-0108 Shim thickness ... 2.0 mm (0.08 inch) (3) Lubricate the sealing lip slightly with the lubricant that is being sealed. (4) Two 244-4149 Sleeve Bearings Outside diameter ... 164.290 0.013 mm (6.4681 0.0005 inch) Inside diameter ... 140.34 - 140.44 mm (5.525 - 5.529 inch) Install the bearing in the bearing bore. ... 9.5 0.8 mm (0.37 0.03 inch) (5) Two 7Y-3589 Sleeve Bearings Outside diameter ... 130.240 0.013 mm (5.1275 0.0005 inch) Inside diameter ... 110.30 0.02 mm (4.343 0.001 inch) Install the bearing in the bearing bore. ... 9.5 0.8 mm (0.37 0.03 inch) (6) Two 234-3749 Sleeve Bearings Outside diameter ... 154.270 0.013 mm (6.0736 0.0005 inch) Inside diameter ... 130.32 - 130.42 mm (5.131 - 5.135 inch) Install the bearing in the bearing bore. ... 9.5 0.8 mm (0.37 0.03 inch)