TRACK GP 2368908 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 350-4401 Adapter Plate 1
B 4-34614 Hoist Ring
Columbus McKinnon Corporation 2
C 1U-9200 Lever Puller Hoist 1
D 1U-5750 Engine Stand 1
1P-2850 Oil Drain Cart 1
E 138-7575 Link Bracket 3
Illustration 1 g02453450
Use Tooling (E) and a suitable lifting device in order to install torque converter (5). The weight of torque converter (5) is approximately 125 kg (275 lb). Note: Ensure that the torque converter adapter is clean. Apply a thin film of clean transmission oil onto the torque converter adapter. Ensure that the splines are aligned. Gently install torque converter (5).
Illustration 2 g02453449
Illustration 3 g02453445
Install bolt (4). Tighten bolt (4) to a torque of 285 15 N m (210 11 lb ft).
Install plug (3). Tighten plug (3) to a torque of 285 15 N m (210 11 lb ft).
Illustration 4 g02453432
Illustration 5 g02453439
Illustration 6 g02453443
Use Tooling (D) in order to position the transmission horizontally. Attach Tooling (B), Tooling (C), and a suitable lifting device onto transmission and torque converter (2). The weight of transmission and torque converter (2) is approximately 544 kg (1200 lb). The weight of transmission and torque converter (2) with a retarder is approximately 590 kg (1300 lb).
Remove transmission and torque converter (2) from Tooling (D).
Illustration 7 g02378306
Remove Tooling (A) from the transmission housing.
Illustration 8 g02453418
Install bracket (1).