2487137 TRACK ADJUSTER & RECOIL GP Caterpillar parts
315D L
Rating:
Alternative (cross code) number:
CA2487137
248-7137
2487137
CA2487137
248-7137
2487137
EXCAVATOR,
Compatible equipment models: 2487137:
Number on catalog scheme:
3
For full view, you need register
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Information:
1. Remove the bolts and washers that hold cover (1) to the rear support. Remove the cover. 2. Fasten a hoist to the rear support.3. Remove four bolts (2), the washers, thrust washer (3) and plate (4). Remove the thrust washer that is behind plate (4).4. Remove the rear support. The weight of the rear support is 45 kg (100 lb). 5. Remove lip seal (6) and sleeve bearing (7) from the rear support.
Typical Example6. Remove bolts (8), the washers and trunnion (9). The weight of the trunnion is 20 kg (45 lb).Install Rear Support (Rear Axle Housing)
1. Put 6V-6640 Gasket Maker on the mating surface of trunnion (9) and the oscillating housing assembly. Put the trunnion in position on the oscillating housing assembly, and install bolts (8) and washers which hold it. Tighten the bolts to a torque of 300 40 N m (220 30 lb ft). 2. Use Tool (A) and a press to install the sleeve bearing in the rear support. 3. Use Tool (A) to install the lip seal in the support. Be sure the lip is facing toward the outside of the rear support as shown. 4. Fasten lifting straps and a hoist to the rear support. Put the rear support in position on the trunnion.5. Put 5P-0960 Multi-Purpose Grease on the two thrust washers.6. Install a thrust washer, plate (4), washers (3) and four bolts (2). Tighten four bolts (2) to a torque of 570 80 N m (420 60 lb ft). 7. Install cover (1). Tighten the bolts to a torque of 270 40 N m (200 30 lb ft).End By:a. install rear axle housing group (oscillating)
Typical Example6. Remove bolts (8), the washers and trunnion (9). The weight of the trunnion is 20 kg (45 lb).Install Rear Support (Rear Axle Housing)
1. Put 6V-6640 Gasket Maker on the mating surface of trunnion (9) and the oscillating housing assembly. Put the trunnion in position on the oscillating housing assembly, and install bolts (8) and washers which hold it. Tighten the bolts to a torque of 300 40 N m (220 30 lb ft). 2. Use Tool (A) and a press to install the sleeve bearing in the rear support. 3. Use Tool (A) to install the lip seal in the support. Be sure the lip is facing toward the outside of the rear support as shown. 4. Fasten lifting straps and a hoist to the rear support. Put the rear support in position on the trunnion.5. Put 5P-0960 Multi-Purpose Grease on the two thrust washers.6. Install a thrust washer, plate (4), washers (3) and four bolts (2). Tighten four bolts (2) to a torque of 570 80 N m (420 60 lb ft). 7. Install cover (1). Tighten the bolts to a torque of 270 40 N m (200 30 lb ft).End By:a. install rear axle housing group (oscillating)
Parts track Caterpillar catalog:
315D L, 318E L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 323D L, 323D LN, 323D2 L, 323E L
315D L, 318E L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 323D L, 323D LN, 323D2 L, 323E L
315D L, 318E L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 323D L, 323D LN, 323D2 L, 323E L
1793027
TRACK GP
315B, 315B L, 315C, 315D L, 316E L, 318D2 L
315B, 315B L, 315C, 315D L, 316E L, 318D2 L
2606990
TRACK GP
315D L, 318D2 L
315D L, 318D2 L
315D L, 318E L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 323D L, 323D LN, 323D2 ...
315C, 315D L, 317B LN, 318B, 318C, 318E L, 320B, 320B U, 320C, 320D, 320D GC, 320D L, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E LN, 320E RR
2979191
TRACK ADJUSTER & RECOIL GP
313D2 LGP, 315D L, 316E L, 318D L, 318D2 L
313D2 LGP, 315D L, 316E L, 318D L, 318D2 L
2979188
TRACK ADJUSTER & RECOIL GP
313D2 LGP, 315D L, 316E L, 318D L, 318D2 L
313D2 LGP, 315D L, 316E L, 318D L, 318D2 L
2979189
TRACK ADJUSTER & RECOIL GP
313D2 LGP, 315D L, 316E L, 318D L, 318D2 L
313D2 LGP, 315D L, 316E L, 318D L, 318D2 L
3230953
TRACK GP
308D
308D
3230954
TRACK GP
307D
307D
3179585
TRACK GP
307D
307D
3155275
TRACK AR
307D
307D
3157664
TRACK GP
303.5D
303.5D
2914619
TRACK AR
319D, 319D LN
319D, 319D LN
3519654
TRACK GP
319D L, 319D LN
319D L, 319D LN
3464613
TRACK GP
319D L, 319D LN
319D L, 319D LN
2979189
TRACK ADJUSTER & RECOIL GP
313D2 LGP, 315D L, 316E L, 318D L, 318D2 L
313D2 LGP, 315D L, 316E L, 318D L, 318D2 L
2979188
TRACK ADJUSTER & RECOIL GP
313D2 LGP, 315D L, 316E L, 318D L, 318D2 L
313D2 LGP, 315D L, 316E L, 318D L, 318D2 L