TRACK GP 2633826 - Caterpillar

Illustration 17 g01370909
Explosion Hazard! Improper jumper cable connections can cause an explosion resulting in serious injury or death. Batteries may be located in separate compartments. Refer to the Operation and Maintenance Manual for the correct jump starting procedure.
Refer to Operation and Maintenance Manual, "Engine Starting with Jump Start Cables" for further information.High Pressure Cylinder (15)This safety message is positioned on the track adjuster.
Illustration 18 g01076729
High Pressure Cylinder. Do not remove any parts from the cylinder until all of the pressure has been relieved. This will prevent possible personal injury or death.
See the Operation and Maintenance Manual , "Track Adjustment - Adjust" information for your product.High Pressure Gas (16)This safety message is located on the accumulator.
Illustration 19 g01374065
This system contains high pressure gas. Failure to follow the instructions and warnings could cause an explosion, resulting in possible injury or death.Do not expose to fire. Do not weld. Do not drill. Relieve pressure before discharging.See Operation and Maintenance Manual for charging and discharging. See your Caterpillar Dealer for tools and detailed information.
Refer to Operation and Maintenance Manual, "Equipment Lowering with Engine Stopped" for further information.Crushing Hazard (17)This safety message is located on both sides of the stick.
Illustration 20 g01385579
A crushing hazard exists when the stick and boom are in motion and when the machine is being used in object handling applications. Failure to stay clear of the stick and boom when the machine is in operation can result in personal injury or death. Stay clear of the stick and boom when the machine is in operation.
Relieve Hydraulic Tank Pressure (18)This safety message is located on the top of the hydraulic tank.
Illustration 21 g01371640
HYDRAULIC TANKRELIEVE TANK PRESSURE WITH ENGINE OFF BY REMOVING CAP SLOWLY TO PREVENT BURNS FROM HOT OIL.
Crushing Hazard (19)This safety message is located on the rear of each side of the machine. This safety message is also located on each side of the counterweight.
Illustration 22 g01374060
Machine swings. Stay back. Crushing hazard could cause serious injury or death.
Hot Surface (20)This safety message is located in two places on the engine hood.
Illustration 23 g00921005
Hot parts or hot components can cause burns or personal injury. Do not allow hot parts or components to contact your skin. Use protective clothing or protective equipment to protect your skin.