TRACK GP 2639252 - Caterpillar

5G1790
(1) Remove guard (1) from the rear of the machine. Install plate assembly (2) on the frame. Fasten alarm (3) to plate assembly (2) with bolts (4) and the washers. Connect 4V321 wire assembly (5) to alarm (3). Fasten wire assembly (5) to plate assembly (2) with bolt (6). (2) Connect the black/pink wire of 5G1752 Wire Assembly (7) to alarm (3). If the machine is equipped with a backup light, disconnect the light from the vehicle wiring harness. Connect the black/pink wire of wire assembly (7) to the dark blue/dark green wire of the vehicle wiring harness. Connect the backup light to the dark blue/dark green wire of wire assembly (7) at location (A), if so equipped. If the machine is not equipped with a backup light, use vinyl tape for protection of the terminal at location (A). Install the guard on the rear of the machine.(3) If the machine is equipped with a backup light, it will not be necessary to install the remainder of the backup warning group because the warning alarm and backup light will both be activated by the existing switch of the backup light group. If the machine is not equipped with a backup light,