TRACK GP 2723162 - Caterpillar

Introduction
The problem that is identified below does not have a known permanent solution. Use the solution that has been identified below until a permanent solution is known.Problem
Additional sealing may be required on the 8E-1118 Antenna As on all Caterpillar machines that are equipped with the antennae to prevent water entry into the cab.Solution
Illustration 1 g02198873
8E-1118 Antenna As Refer to Illustration 1 for the locations to apply black Loctite 593 on the antennae assembly:
Around the top edge (1) of the antennae assembly base
Around the base (2) of the antennae assembly
On the top of the screw (3) in the base of the antennae assembly