TRACK AS 2741777 - Caterpillar

Table 1
New Part Number     Description     Quantity    
319-6220     Elbow As     1    
423-4640     Hose As     1    
423-4641     Hose As     1    
228-7093     O-Ring Seal     1    
6V-1889     Clip     4    
8T-7088     Grommet     3    
204-2281     Cable Strap     3    This change is effective for the engine serial numbers TXF4797-UP.Removal and Installation Procedure
Illustration 1 g03340064
(1) Seal O-Ring (2) Clips (Retain the Bolts and Washers for reassembly) (3) Hose Assembly (4) Seal O-Ring (5) Adapter
Remove the hose assemblies and mounting hardware indicated in Illustration 1.
Illustration 2 g03340934
(6) 228-7093 O-Ring Seal (7) 423-4641 Hose As (8) 423-4640 Hose As (9) Two 8T-7088 Grommets (10) Two 204-2281 Cable Straps (11) Two 6V-1889 Clips (12) Two 8T-4121 Hard Washers (13) 8T-4136 Bolt (14) 8T-4133 Nut (15) 319-6220 Elbow As
Connect hoses (7) and (8) to the remote oil filter base.Note: New O-ring (6) must be used connecting hose (8) .
Route hoses (7) and (8) and secure the hoses to the bracket where shown using clips (11), washers (12), bolts (13), and nut (14) .Note: Bolts (113) and washers (12) were retained from the removal of the old parts.
Install connector (15) into the oil line adapter. Connect the hoses to the connectors as shown.
Install grommets (9) and cable straps (10) as shown in Illustration 2.