TRACK G.-20 2H9338 - Caterpillar

Illustration 1 g02623118
Two towing eyes (1) are located on the front of the machine.
Illustration 2 g02623120
Two towing eyes (2) are located on the rear of the machine.
The strength of the line should be at least 1.5 times the gross weight of the machine.
Provide shielding in order to protect the operator if the line breaks.
If a single line is used to pull the machine, then the line must be a minimum of 3 m (10 ft). If two lines are used to pull the machine, then each line must be a minimum of 1.5 m (5.0 ft).
Do not exceed a maximum pull angle of 20 degrees in any direction.
Attach the line to the towing eyes. Two towing eyes (1) are located on the front of the machine and two towing eyes (2) are located on the rear of the machine. Do not attach the line to any other point on the machine.
Do not attach the line to only one towing eye when you are retrieving the machine. Use both towing eyes. Damage to the machine may occur.
Illustration 3 g01019066
Each of the lines (3) must be a minimum of 1.5 m (5.0 ft).
Do not drag the machine for long distances. Damage to the tracks or the tires may occur.