TRACK GP 3317388 - Caterpillar

Illustration 1 g00292461
Fuel System Schematic (1) Gas input. (2) Customer supplied regulator. (3) Gas shutoff valve. (4) Control valve. (5) Fuel manifold. (6) Orifice. (7) Needle valve. (8) Precombustion chamber supply line. (9) Precombustion chamber check valve. (10) Electronic actuator. (11) Gas admission valve. (12) Precombustion chamber. (13) Main gas supply. (14) Spark plug. (15) Combustion air. (16) Cylinder head inlet port. (17) Inlet valve. (18) Exhaust valve.Gas is delivered to the engine through a customer supplied regulator (2) . Fuel pressure must be 310 14 kPa (45 2 psi) and the fuel pressure must be regulated to 1.7 kPa (.25 psi). Lower fuel pressure may result in reduced power. The regulator is connected to a gas shutoff valve (3) , which is controlled by the Engine Control Module (ECM).Control valve (4) , which is controlled by the electronic actuator (10) regulates the gas pressure in the fuel manifold (5) . The electronic actuator controls the fuel manifold pressure. This control is based on a signal that was received from the engine control module. The engine control module determines the signal. The signal is based on the difference between the actual engine rpm and the desired engine rpm. Engine speed is controlled by the fuel manifold pressure. The fuel manifold (5) supplies gas to all cylinders.Each cylinder has an orificed fuel line that is connected to the fuel manifold. The fuel line delivers gas to the gas admission valve (11) and from the gas admission valve on to the main combustion chamber. A separate fuel line (8) and adjustable needle valve (7) provide a new supply of gas to the precombustion chamber (12) .Main Combustion Chamber
Illustration 2 g00292464
Combustion Chamber (1) Gas admussion valve. (2) Check valve. (3) Inlet air. (4) Main combustion chamber. (5) Precombustion chamber.The gas admission valve (1) is mounted in the inlet port and is actuated by the camshaft. As the gas admission valve is opened, gas is admitted into the inlet port. The gas mixes with the combustion air in the inlet port. The gas and combustion air mix and flow into the cylinder.Combustion air flow into the cylinder head is regulated (depending on the engine load) by the exhaust bypass valve (wastegate) and inlet air choke. As air flows into the cylinder head inlet valve chamber, the cam operated gas admission valve (1) admits gas to the air flow as the inlet valve opens. At the same time, an additional, separate, new gas supply is added to the precombustion chamber (5) through a ball type check valve (2) .Precombustion Chamber
Illustration 3 g00292465
PC Check Valve And Fuel Supply Path (1) Fuel inlet passage. (2) Check valve. (3) Passageways for the jacket water coolant. (4) Precombustion chamber.The new gas supply for the precombustion chamber (4) comes from the manifold. The