TRACK GP 3794054 - Caterpillar

When Required
Engine Air Intake System - Clean/Replace elements Ether Starting Aid (If Equipped) - Install cylinder Fuses and Circuit Breakers - Replace fuses/Reset breakers Cutting Edges and End Bits - Replace if worn or damaged Ripper Tips (If Equipped) - Replace if worn or damaged Radiator - Clean/Replace pressure cap Transmission System - Clean screens Windshield Wipers and Washer (If Equipped) - Inspect/Replace Winch (If Equipped) - Install wire rope cable Filter Inspection - Inspect Fuel Cap and Filter - Clean/Replace Fuel System - Service when loss of power occursEvery 10 Service Hours or Daily
Walk-Around Inspection - Inspect machine Seat Belt - Inspect for wear or damage Engine Crankcase - Check oil level Transmission System - Check oil level Hydraulic Tank - Check oil level Radiator - Check coolant level Fuel Tank - Drain water and sediment Indicators, Gauges, Horn, Lights and Brakes - Test Winch (If Equipped) - Check oil level Back-up Alarm (If Equipped) - Test Cab Air System (If Equipped) - Clean filtersEvery 50 Service Hours or Weekly*
Pivot Shaft - Check oil level Track Pins - Inspect Ripper Linkage and Cylinder Bearings (If Equipped) - LubricateEvery 250 Service Hours or Monthly*
Engine Oil and Filter - Change oil and filter. If sulfur content in the fuel is more than 1.5% by weight, use an oil with a TBN of 30 and reduce the oil change interval by one half Cooling System - Add coolant additive Final Drives - Check oil level Power Train Oil - Change filter Brakes - Test Tracks - Adjust Fan and Alternator Belts - Inspect/Adjust/Replace Air Conditioner (If Equipped) - Test Batteries - Check electrolyte level Bulldozer Tilt Brace - Lubricate Equalizer Bar Pins - Lubricate Fuel Cap - Clean Engine Valve Clearance Setting - Adjust on new, rebuilt or reconditioned engines at first oil change, then at normal interval thereafterEvery 500 Service Hours or 3 Months*
Hydraulic System - Change filter Engine Crankcase Breather - Clean Recoil Spring Compartment - Check oil level Fuel System - Clean and change filters Winch Filter and Magnetic Strainer (If Equipped) - Change element, wash strainerEvery 1000 Service Hours or 6 Months*
Transmission System - Change oil/Wash screen Final Drives - Change oil Winch (If Equipped) - Change oil/Wash breather Rollover Protective Structure (ROPS) Falling Object Structure (FOPS) - InspectEvery 2000 Service Hours or 1 Year*
Hydraulic Tank - Change oil Engine Valve Clearance Setting - Adjust Engine Valve Rotators - Check Track Roller Frame Guides - Measure wearEvery 3000 Service Hours or 2 Years*
Cooling System - Change coolant/Clean system*First Perform Previous Service Hours Items