TRACK CARRIER ROLLER GROUP 3K7962 - Caterpillar

Pressurized system: Hot coolant can cause serious burn. To open cap, stop engine, wait until radiator is cool. Then loosen cap slowly to relieve the pressure.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Do not change the coolant until you read and understand the material in the Cooling System Specifications section.
Mixing Extended Life Coolant (ELC) with other products reduces the effectiveness of the coolant and shortens coolant life. Use only Caterpillar products or commercial products that have passed the Caterpillar EC-1 specifications for premixed or for concentrate coolants. Use only Caterpillar Extender with Caterpillar ELC. Failure to follow these recommendations could result in the damage to cooling system components.If ELC cooling system contamination occurs, refer to Operation and Maintenance Manual, SEBU6250, "Caterpillar Machine Fluids Recommendations" under the topic of ELC Cooling System Contamination.This machine was factory filled with Extended Life Coolant.
Drain the coolant whenever the coolant is dirty or whenever foaming is observed.
Park the machine on a level surface.
Move the transmission control to the PARK position.
Illustration 1 g06102759
Open cover (1)
Slowly loosen the radiator cap (2) to relieve system pressure. Remove the radiator cap.
Illustration 2 g06007476
Open the drain valve (3) for the cooling system. Drain the coolant into a suitable container.
Close the drain valve. Fill the system with clean water.
Start the engine and operate the engine for 90 minutes. Check the cooling system for leaks. Stop the engine and drain the cleaning solution into a suitable container.
When the engine is stopped, flush the system with water until the draining water is clear. Drain the water into a suitable container.
Close the drain valve.
Add the coolant solution.
Operation and Maintenance Manual, SEBU6250, "Caterpillar Machine Fluids Recommendations"
Operation and Maintenance Manual, "Capacities (Refill)"
Start the engine. Run the engine without the radiator cap. Run the engine until the thermostat opens and the coolant level stabilizes. If necessary, add coolant.Note: If you are using Cat antifreeze, do not add the supplemental coolant additive now and/or change the element now.
Install the radiator cap.