TRACK AS 4546048 - Caterpillar

The connection of battery cables to a battery and the disconnection of battery cables from a battery may cause an explosion which may result in injury or death. The connection and the disconnection of other electrical equipment may also cause an explosion which may result in injury or death. The procedures for the connection and the disconnection of battery cables and other electrical equipment should only be performed in a nonexplosive atmosphere.
The battery cables or the batteries should not be removed with the battery cover in place. The battery cover should be removed before any servicing is attempted.Removing the battery cables or the batteries with the cover in place may cause a battery explosion resulting in personal injury.
Turn the start switch to the OFF position. Turn the ignition switch (if equipped) to the OFF position and remove the key and all electrical loads.
Disconnect the negative battery terminal at the battery that goes to the start switch. Ensure that the cable cannot contact the terminal. When four 12 volt batteries are involved, the negative side of two batteries must be disconnected.
Tape the leads in order to help prevent accidental starting.
Proceed with necessary system repairs. Reverse the steps in order to reconnect all of the cables.