TRACK GP 4561743 - Caterpillar

When Required
Engine Air Intake System - Service filters Batteries - Inspect Fuel System - Service when loss of power Radiator - Replace cap, clean core Cooling System - Replace coolant if dirty Fuses and Circuit Breaker - Replace/Reset Suspension Seat - Lubricate 9 fittings Track - AdjustEvery 10 Service Hours or Daily
Engine Oil - Check CD/SE or CD/SF oil level Hydraulic Oil - Check HYDO oil level Cooling System - Check coolant level Fuel Tank - Drain water and sediment Walk-Around Inspection - Inspect machine Seat Belt - Inspect Indicators and Gauges - Test Back-up Alarm - TestEvery 50 Service Hours or Weekly
First Perform Previous Service Hours Items
Power Train Oil System - Check CD oil levelEvery 250 Service Hours or 3 Months
First Perform Previous Service Hours Items
Engine Oil and Filter - Change CD/SE or CD/SF oil and filter. If the sulfur content in the fuel is greater than 1.5% by weight, use an oil with a TBN of 30 and reduce the oil change interval by one half Engine Valve Lash - Adjust on new or reconditioned engines at first oil change only Power Train Oil System - Change filter Final Drives - Check CD oil level Cooling System - Add conditioner Tracks - Check adjustment Fan and Alternator Belts - Inspect/Adjust Batteries - Check electrolyte levelEvery 500 Service Hours or 6 Months
First Perform Previous Service Hours Items
Engine Crankcase Breather - Clean Power Train Oil System - Service Hydraulic System - Service elements/cap Fuel System - Clean/change filters Fuel Tank Cap and Fill Screen - Clean Universal Joints - Lubricate 2 fittings Power Take Off Bearings and Universal Joints - Lubricate 3 fittings Pivot Shaft - Check CD oil levelEvery 1000 Service Hours or 1 Year
First Perform Previous Service Hours Items
Hydraulic System - Change HYDO oil Cooling System Coolant - Change coolant Final Drives - Change CD oil Rollover Protective Structure (ROPS) - Inspect PCV Valve (If Equipped) - Check diaphragms Engine Valve Lash - Adjust Equalizer Bar - Lubricate 2 fittings