4582111 TRACK GP Caterpillar parts
Rating:
Alternative (cross code) number:
CA4582111
458-2111
4582111
CA4582111
458-2111
4582111
Weight: 486 pounds 220 kg.
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
HASMX Hex Head Flange Screw Replaces Part Number 116-4701 Fits for Pioneer E-Series S-Series, 2-Pack
HASMX Hex Head Flange Screw Replaces Part Number 116-4701 || Fits for Pioneer E-Series S-Series || Fits for Toro Exmark Models || Package Includes: 2 X Hex Head Flange Screws || Every product from HASMX will enjoy 30 days Money-back and 18-Months Worry-free Warranty.
HASMX Hex Head Flange Screw Replaces Part Number 116-4701 || Fits for Pioneer E-Series S-Series || Fits for Toro Exmark Models || Package Includes: 2 X Hex Head Flange Screws || Every product from HASMX will enjoy 30 days Money-back and 18-Months Worry-free Warranty.
Eopzol Replacement Vacuum Belt Replaces Part Number 160-4895 1604895 Compatible with 31304 31305 31306 31308 31309 3130A 3130B 3130C 3130F 3130H Models
Eopzol Belt Replaces Part Number 160-4895, 1604895 || Replacement for Bissell PowerForce Lightweight Vacuum Belt || Compatible with Models: 23T7, 23T74, 23T77, 23T7E, 23T7F, 23T7G, 23T7K, 23T7P, 23T7Q, 23T7T, 23T7U, 23T7W, 23T7Y, 3130, 31033, 3120, 31301, 31302, 31303, 31304, 31305, 31306, 31308, 31309, 3130A || Package Includes: 1 X Belt || Every product from Eopzol will enjoy 30 days Money-back and 18-Months Worry-free Warranty.
Eopzol Belt Replaces Part Number 160-4895, 1604895 || Replacement for Bissell PowerForce Lightweight Vacuum Belt || Compatible with Models: 23T7, 23T74, 23T77, 23T7E, 23T7F, 23T7G, 23T7K, 23T7P, 23T7Q, 23T7T, 23T7U, 23T7W, 23T7Y, 3130, 31033, 3120, 31301, 31302, 31303, 31304, 31305, 31306, 31308, 31309, 3130A || Package Includes: 1 X Belt || Every product from Eopzol will enjoy 30 days Money-back and 18-Months Worry-free Warranty.
For full view, you need register
Information:
Track Carrier Roller Lubrication
If lubricant is added with the roller removed from the machine, shaft (1) must be in horizontal position.
TRACK CARRIER ROLLER
1. Shaft. 2. Duo-Cone seal. 3. Bearings. 4. Passage. 5. End cover. 6. Plug.Lubricant is sent into center passage (4) through the 5M2080 Nozzle. The lubricant fills the cavity between shaft (1) and the roller. When the cavity is full, the pressure of the oil causes the air and extra lubricant to go out the relief threads in the nozzle.When the lubricant does not have any bubbles, remove the nozzle and install the plug. Tighten the plug to a torque of 125 15 lb. ft. (170 20 N m).Track Rollers
The track rollers are fastened to the track roller frames. The track rollers are in contact with the inside surfaces of the track links. Flanges on the track rollers prevent the movement of the track from side to side. The inside surfaces of the track links cause an equal distribution of the weight of the machine along the track.The flange at the center of shaft (5) gets the side load on the roller. Bearings (3) also get the side load on the roller. The amount of side movement or end clearance of the shaft can not be adjusted.The track rollers have Duo-Cone floating seals (6) at both ends of shaft (5).Each track roller frame has six track rollers. The installation of six track rollers is as follows: 1. Start at the front of the machine and install one double flange roller. 2. Then install one single flange roller. 3. Then install one double flange roller. 4. Then install one single flange roller. 5. Then install one double flange roller. 6. Then install one single flange roller.
TRACK ROLLER
1. Lock. 2. Inner end collar. 3. Bearings. 4. Outer end collar. 5. Shaft. 6. Duo-Cone seals. 7. Track roller.Track Roller Lubrication
If lubricant is added with the roller removed from the machine, shaft (1) must be in a horizontal position. The slot, in the end where the 5M2080 Nozzle is installed, must be down.Lubricant is sent into center passage (5) through the 5M2080 Nozzle. The lubricant fills the reservoirs (4) in the rollers. When the reservoirs are full, the pressure of the oil causes the air and extra lubricant to go out the relief threads on the nozzle.
TRACK ROLLER
1. Shaft. 2. Duo-Cone seals. 3. Plug. 4. Reservoirs. 5. Center passage.When the lubricant does not have any bubbles, remove the nozzle and install the plug. Tighten the plug to a torque of 125 15 lb. ft. (170 20 N m).Front Idlers
The front idlers put the tracks in position in front of the track rollers. They also keep the tracks in alignment with the sprockets.The adjustment of the tracks is done by the movement of the front idlers. The track adjusters move the front idlers and hold them in position.
FRONT IDLER
1. Fill plug. 2. Duo-Cone seal. 3. Bearings. 4. Bearing. 5. Shims. 6. Plate. 7. Outer plate. 8. Idler.
If lubricant is added with the roller removed from the machine, shaft (1) must be in horizontal position.
TRACK CARRIER ROLLER
1. Shaft. 2. Duo-Cone seal. 3. Bearings. 4. Passage. 5. End cover. 6. Plug.Lubricant is sent into center passage (4) through the 5M2080 Nozzle. The lubricant fills the cavity between shaft (1) and the roller. When the cavity is full, the pressure of the oil causes the air and extra lubricant to go out the relief threads in the nozzle.When the lubricant does not have any bubbles, remove the nozzle and install the plug. Tighten the plug to a torque of 125 15 lb. ft. (170 20 N m).Track Rollers
The track rollers are fastened to the track roller frames. The track rollers are in contact with the inside surfaces of the track links. Flanges on the track rollers prevent the movement of the track from side to side. The inside surfaces of the track links cause an equal distribution of the weight of the machine along the track.The flange at the center of shaft (5) gets the side load on the roller. Bearings (3) also get the side load on the roller. The amount of side movement or end clearance of the shaft can not be adjusted.The track rollers have Duo-Cone floating seals (6) at both ends of shaft (5).Each track roller frame has six track rollers. The installation of six track rollers is as follows: 1. Start at the front of the machine and install one double flange roller. 2. Then install one single flange roller. 3. Then install one double flange roller. 4. Then install one single flange roller. 5. Then install one double flange roller. 6. Then install one single flange roller.
TRACK ROLLER
1. Lock. 2. Inner end collar. 3. Bearings. 4. Outer end collar. 5. Shaft. 6. Duo-Cone seals. 7. Track roller.Track Roller Lubrication
If lubricant is added with the roller removed from the machine, shaft (1) must be in a horizontal position. The slot, in the end where the 5M2080 Nozzle is installed, must be down.Lubricant is sent into center passage (5) through the 5M2080 Nozzle. The lubricant fills the reservoirs (4) in the rollers. When the reservoirs are full, the pressure of the oil causes the air and extra lubricant to go out the relief threads on the nozzle.
TRACK ROLLER
1. Shaft. 2. Duo-Cone seals. 3. Plug. 4. Reservoirs. 5. Center passage.When the lubricant does not have any bubbles, remove the nozzle and install the plug. Tighten the plug to a torque of 125 15 lb. ft. (170 20 N m).Front Idlers
The front idlers put the tracks in position in front of the track rollers. They also keep the tracks in alignment with the sprockets.The adjustment of the tracks is done by the movement of the front idlers. The track adjusters move the front idlers and hold them in position.
FRONT IDLER
1. Fill plug. 2. Duo-Cone seal. 3. Bearings. 4. Bearing. 5. Shims. 6. Plate. 7. Outer plate. 8. Idler.
Parts track Caterpillar catalog:
4578470
TRACK GP
Caterpillar
Caterpillar
4578457
TRACK GP
Caterpillar
Caterpillar
4578314
TRACK GP
Caterpillar
Caterpillar
4576827
TRACK AR
Caterpillar
Caterpillar
4570215
TRACK AR
Caterpillar
Caterpillar
4570213
TRACK AR
Caterpillar
Caterpillar
4641025
TRACK AR
Caterpillar
Caterpillar
4609531
TRACK GP
Caterpillar
Caterpillar
4609249
TRACK GP
Caterpillar
Caterpillar
4607485
TRACK GP
Caterpillar
Caterpillar
4607484
TRACK GP
Caterpillar
Caterpillar
4607483
TRACK GP
Caterpillar
Caterpillar