TRACK GP 4658493 - Caterpillar

Illustration 1 g01948559
There are several specific messages on this machine. The location of the messages and the description of the messages are reviewed in this section. Please become familiarized with all messages.Make sure that all of the messages are legible. Clean the messages or replace the messages if you cannot read the words. Replace the illustrations if the illustrations are not legible. When you clean the messages, use a cloth, water and soap. Do not use solvent, gasoline, or other harsh chemicals to clean the messages. Solvents, gasoline, or harsh chemicals could loosen the adhesive that secures the messages. Loose adhesive will allow the messages to fall.Replace any message that is damaged, or missing. If a message is attached to a part that is replaced, install a message on the replacement part. Any Caterpillar dealer can provide new messages.Air Conditioner (1)This safety message is located on the left side of the instrument panel.
Illustration 2 g00927763
This safety message for the air conditioner has the appropriate information for the following services: the air conditioner lubricant, the refrigerant charge and the refrigerant capacity. Also, this safety message instructs the usage of the proper safety information.Follow instruction in order to avoid engine damage."No Weld/No Drill" (2) This message is located on the left post inside the cab.
Illustration 3 g01212169
Machine Movement (3) This message is located near the steering control lever.
Illustration 4 g01024657
When the steering lever is moved with the transmission in NEUTRAL or in gear, and the engine is running, the machine will turn. Engage the steering control lock by engaging the parking brake in order to prevent machine movement.
Air Cleaner (4) This message is located on the cover of the air cleaner.
Illustration 5 g01785473
To avoid engine damage, use only Caterpillar radial seal air filters as replacement filters. Refer to the following topics for correct replacement instructions:
Operation and Maintenance Manual, "Engine Air Filter Primary Element - Clean/Replace"
Operation and Maintenance Manual, "Engine Air Filter Secondary Element - Replace"Product Link (5)
Illustration 6 g01476104
Illustration 7 g01418953
If your machine is equipped with the Product Link System, this additional message is located in the cab on the rear right C post.The Product Link System is a satellite communication device that transmits information regarding the machine back to Caterpillar and Caterpillar dealers and customers. All logged events and diagnostic codes that are available to the Caterpillar Electronic Technician (ET) on the CAT data link can be sent to the satellite. Information can also be sent to the Product Link System. The information is used to improve Caterpillar products and Caterpillar services.Refer to Operation and Maintenance Manual, "Product Link" for more information.