TRACK G. 5S0826 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
(A)     9U-6758     Pin Driver Cap     1    
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Make sure the pin bores in the fore boom, the stick, and the stick cylinder are clean and free of dirt prior to installation of the stick cylinder.
Note: Check the seals and the bearings in the pin bores of the stick cylinder. If any of these components are worn or damaged, use new parts for replacement.
Illustration 1 g00612779
Illustration 2 g00612457
Fasten two lifting slings and a hoist to