TRACK ROLLER FRAME GROUP 6S7447 - Caterpillar

Sudden movement of the machine or release of oil under pressure can cause injury to persons on or near the machine.To prevent possible injury, perform the procedure that follows before testing and adjusting the brake system.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in Caterpillar machines.Dispose of all fluids according to local regulations and mandates.
Move the machine to a smooth, horizontal location. Move the machine away from other operating machines and away from personnel. Stop the engine.
Permit only one operator on the machine. Keep all other personnel away from the machine or in sight of the operator.
Engage the parking brake. Lower the bucket or the attachment to the ground. Put blocks in front of the wheels and behind the wheels.
Install the steering frame lock.
In order to relieve any brake oil pressure, push on the brake pedal many times.
In order to relieve all of the pressure in the hydraulic oil tank, slowly loosen the filler cap.
Make sure that all oil pressure is released before you begin any work on the brake hydraulic system.