TRACK G 7G7148 - Caterpillar



7G7148 TRACK G Caterpillar parts
Rating:
31
Alternative (cross code) number:
CA7G7148
7G-7148
7G7148
Caterpillar 7G7148 TRACK G
Weight: 5 pounds 2 kg.

Buy TRACK G 7G7148 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Information:

The following information lists the functions of the display:
The display monitors the data from the system components
The display monitors the status of the system components
The display shows the information to the operator
The display warns the operator of objects and/or faults
The display provides an operator interface in order to control the systemThe display consists of the following components:
Button (function) that are located on the right side of the display
An audible alarm that is located on the bottom right portion of the displayObject Detection Sensor
Illustration 2 g03332689
(13) Object Detection Sensor Enclosure (14) Object Detection SensorTwo object detection sensors are used on the front of the machine. Four object detection sensors are used on the rear of the machine. One sensor will be used on each side of the machine. Sensors provide information for the range to the object.Camera
Illustration 3 g01223051
The cameras provide the operator with a view of critical areas around the truck for use in identifying objectsExternal Lights
Illustration 4 g01843254
Example of an External LightThe external lights are mounted to the same brackets that are used for the cameras. The mounting brackets are installed on the left side and the right side of the machine. The lights provide illumination for the cameras that are installed on the sides of the machine. The lights are controlled by the display.Component Locations
Display
Illustration 5 g02581499
(1) Ceiling Mount
Illustration 6 g02027739
(2) Pedestal Mount
Illustration 7 g03361084
(3) Console MountThere are three mountings available for the display. The ceiling mount is mounted to the upper left of the operator, to the ceiling of the cab. The pedestal mount is mounted to the right of the operator, on the floor of the cab. The console mount is mounted to the side of the console. Refer to the Illustrations 5, 6 and 6.anFront Object Detection Sensors and Camera
Illustration 8 g03333878
(15) Front Camera
Illustration 9 g03333929
(16) Front Object Detection SensorRear Object Detection Sensor and Camera
Illustration 10 g03333885
(17) Rear Object Detection Sensors and CameraLeft Object Detection Sensor, Camera, and External Light
Illustration 11 g03333237
(18) External Light (19) Camera (20) Left Object Detection SensorRight Object Detection Sensor, Camera, and External Light
Illustration 12 g03333248
Right Object Detection Sensor, Camera, and External Light

Parts track Caterpillar catalog: