TRACK GP 7T2295 - Caterpillar

ACTION REQUIRED
1. Select the correct software and download the file from SISWeb.
2. Flash the software into the engine Electronic Control Module (ECM).
3. Program the Low Idle Engine RPM to minimum of 700 RPM.
4. If the affected product is a PTO application, perform rework special instruction REHS5039 for proper installation of the "Auto" PTO Regen feature. Do not install the switch for this feature in Link Belt Crank installations.
Note: When performing Regen system special tests using Cat ET, engine RPM must be stable for at least 60 seconds for the tests to initialize.
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-20000 hrs,
0-60 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 1.0-hour job
For PTO applications, $20.00 is allowed for the switch, wiring, and connectors needed. The switch needed is an ON/OFF switch to be procured locally (typically from OEM).
Up to an additional 1.5 hours labor may be claimed for installation of the ON/OFF Switch.
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.