TRACK GP 8E4293 - Caterpillar

8E4293 TRACK GP Caterpillar parts D5HTSK II

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA8E4293
8E-4293
8E4293

Weight: 2161 pounds 980 kg.

Buy TRACK GP 8E4293 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK SKIDDER,

Compatible equipment models: 8E4293:

TRACK SKIDDER D5HTSK II Caterpillar

For full view, you need register

Information:

Step 1. CHECK FOR PROPER OPERATION
Occupy the seat.
Place the armrest in the DOWN position.
Turn the key start switch to the ON position.
Place the work tool lockout switch in the OFF position.
Press and release the parking brake switch.Expected Result:The work tool should function.Results:
OK - The work tool is functioning. Proceed to Test Step 2.
NOT OK - The work tool does not function and the parking brake indicator is off. Proceed to Test Step 5.
NOT OK - The work tool does not function and the parking brake indicator is on.Repair: See Troubleshooting, "Switch (Parking Brake)". Stop.
NOT OK - The work tool does not function and the parking brake indicator is flashing.Repair: See Troubleshooting, "Parking Brake Indicator Is Flashing ". Stop.Test Step 2. CHECK FOR PROPER OPERATION
Press and release the work tool lockout switch.Expected Result:The work tool should not function.Results:
OK - The work tool does not function.Repair: There is no problem at this time. Stop.
NOT OK - The work tool is functioning. Proceed to Test Step 3.Test Step 3. CHECK THE CIRCUIT FOR THE WORK TOOL LOCKOUT SWITCH
Place the work tool lockout switch in the ON position.
Turn the key start switch to the OFF position.
Raise the cab. See Operation and Maintenance Manual, "Cab Tilting".
Locate the Interlock ECM. The interlock ECM is located on the back side of the cab. The cab must be in the RAISED position in order to