TRACK ROLLER GROUP 9S3393 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 369-5916 Link Bracket 2
Illustration 1 g03422769
Attach Tooling (A), and a suitable lifting device to torque converter, transmission, and output transfer gears assembly (14). The weight of torque converter, transmission, and output transfer gears assembly (14) is approximately 1700 kg (3748lb).
Position torque converter, transmission, and output transfer gears assembly (14).
Illustration 2 g03422801
Install bolts (21).
Slightly raise torque converter, transmission, and output transfer gears (14). Remove suitable blocking (20) from engine (22). Install clip (19).
Illustration 3 g03422776
Illustration 4 g03422796
Use two people to install mount assembly (16). The weight of mount assembly (16) is approximately 25 kg (55 lb). Install bolts (17). Repeat for the opposite side.
Install transmission mounting bolts (15). Tighten bolts (15) and (18) to a torque of 900 100 N m (664 74 lb ft).
Illustration 5 g03422764
Install fill tube assembly (13).
Illustration 6 g03422747
Connect hose assembly (12) .
Illustration 7 g03422706
Connect hose assembly (11).
Illustration 8 g03422703
Connect hose assemblies (9). Install clip (10).
Illustration 9 g03422697
Tighten clamp (8).
Illustration 10 g03422694
Connect tube assembly (7). Tighten clip (6).
Illustration 11 g03422689
Connect tube assemblies (4) and (5).
Illustration 12 g03422680
Connect hose assemblies (1) and (2). Install clips (3).End By:
Remove the steering control valve.
Remove the center drive shaft.
Remove the rear drive shaft.
Remove the power train guard (Transmission).
Remove the crankcase guard.
Remove the clean emissions module.
Remove the hydraulic tank.