TRANSDUCER- 4749419 - Caterpillar

Coat all pin bores, including lift and tilt cylinders and the bucket, with 1E2254 lubricant. Lubricate the lip of all seals with lubricant being sealed. Install washers, as required at gap X, between lift arm and frame to center lift arm assembly between bosses on non-engine end. The maximum total gap at any one location is 1.6 mm (.0629 in). 8R0308 Washer thickness (new) ... 1.6 mm (.063 in)8R0309 Washer thickness (new) ... 3.0 mm (.118 in) Use washers as required at gap Y to center bucket in the lift arm assembly. 5V6454 Washer thickness (new) ... 1.6 mm (.063 in)5V6455 Washer thickness (new) ... 3.0 mm (.118 in)