TRANSMISSION AR 1376229 - Caterpillar

Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Drain the fuel from the fuel tank into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual for the fuel tank capacity.
Illustration 1 g00702168
Open storage box (1). Lock the cover in the OPEN position.
Illustration 2 g00702174Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Loosen hose clamp (3).
Disconnect hose (2) from the refueling pump. Remove hose (2) from the storage box.
Illustration 3 g00702178
Loosen hose clamp (4).
Disconnect hose (5) from the refueling pump.
Illustration 4 g00702184
Disconnect electrical connector (6).
Illustration 5 g00702190
Illustration 6 g00703106
This is a view under the storage box.
Remove nuts (9), bolts (7) and the washers.
Remove refueling pump (8).