1419909 TRANSMISSION AR Caterpillar parts
836
Rating:
Alternative (cross code) number:
CA1419909
141-9909
1419909
CA1419909
141-9909
1419909
LANDFILL COMPACTOR,
Compatible equipment models: 1419909:
Number on catalog scheme:
For full view, you need register
Information:
The Electronic Control Module (ECM) allows the ordinary switch input circuits to the ECM to have a tolerance for resistance and shorts between wires. These tolerances are the following items:
The ECM will tolerate resistance in any ordinary switch up to 2.5 ohms without malfunctioning.
The ECM will tolerate shorts to the ground. The ECM will also tolerate shorts between wires in any ordinary switch input that is 5000 ohms or more without malfunctioning.The ECM draws a maximum of 10 amp at 24 volts from the electrical system. However, the ECM will function with less than 12 volts. A minimum of 9 volts is required by the ECM while the engine is cranking or running. Power enters the ECM through the +Battery wire. Power exits through the −Battery wire.The ECM is protected against power surges on the 24 volt power supply.
The ECM will tolerate resistance in any ordinary switch up to 2.5 ohms without malfunctioning.
The ECM will tolerate shorts to the ground. The ECM will also tolerate shorts between wires in any ordinary switch input that is 5000 ohms or more without malfunctioning.The ECM draws a maximum of 10 amp at 24 volts from the electrical system. However, the ECM will function with less than 12 volts. A minimum of 9 volts is required by the ECM while the engine is cranking or running. Power enters the ECM through the +Battery wire. Power exits through the −Battery wire.The ECM is protected against power surges on the 24 volt power supply.
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts transmission Caterpillar catalog:
769D, 771D
1343177
TRANSMISSION GP-IND
G3412, G3512
G3412, G3512