TRANSMISSION AR 2675245 - Caterpillar

2675245 TRANSMISSION AR Caterpillar parts 24M

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA2675245
267-5245
2675245

Weight: 3086 pounds 1399 kg.

Buy TRANSMISSION AR 2675245 Caterpillar genuine, new aftermarket tractor parts with delivery
MOTOR GRADER,

Related part:

2675245 TRANSMISSION AR 10R9506 R

This part in 4 request: Show. This information for suppliers only!

2024-08-12

2024-07-25

2019-03-29

2018-07-09

Compatible equipment models: 2675245:

MOTOR GRADER 24M Caterpillar

Number on catalog scheme: 69

Caterpillar 2675245 Parts scheme TRANSMISSION AR

For full view, you need register

Information:

Removal Procedure
Start By:
Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic System Pressure - Release".
Cylinders equipped with lock valves can remain pressurized for very long periods of time, even with the hoses removed.Failure to relieve pressure before removing a lock valve or disassembling a cylinder can result in personal injury or death.Ensure all pressure is relieved before removing a lock valve or disassembling a cylinder.
Position the bucket on the ground.
Illustration 1 g01232864
Disconnect hose assembly (1) that supplies oil to the head end of the stick cylinder.
Illustration 2 g01232866
Disconnect hose assembly (7). Remove bolts (4) and pin assembly (3). Remove bolts (5) and pin assembly (6). Remove stick cylinder (2). The weight of stick cylinder (2) is approximately 57 kg (125 lb).Disassembly and Assembly Information
Table 1
Required Tools
Tool Part Number Part Description Qty
A 7M-7456 Bearing Mount Compound 1
B 1P-1831 Bearing Puller Adapter 1
9U-6833 Nut 1
4C-9633 Puller Stud 1
3S-6224 Electric Hydraulic Pump Gp 1
6V-3160 Double Acting Cylinder 1 Note: Tooling (B) is for the removal and installation of the bearings that are located at the rod end and the head end of the stick cylinder.
Cylinders equipped with lock valves can remain pressurized for very long periods of time, even with the hoses removed.Failure to relieve pressure before removing a lock valve or disassembling a cylinder can result in personal injury or death.Ensure all pressure is relieved before removing a lock valve or disassembling a cylinder.
Illustration 3 g01216347
(1) Torque for the nut ... 1720 70 N m (1269 52 lb ft) (2) Torque for the head ... 637 63.5 N m (470 47 lb ft) (3) Lubricate the sealing lip slightly with the lubricant that is being sealed. (4) Apply Tooling (A) to the groove prior to assembly.Installation Procedure
Illustration 4 g01232866
Install stick cylinder (2). The weight of stick cylinder (2) is approximately 57 kg (125 lb). Install pin assembly (6) and bolts (5). Install pin assembly (3) and bolts (4). Connect hose assembly (7).
Illustration 5 g01232864
Connect hose assembly (1) that supplies oil to the head end of the stick cylinder.