TRANSMISSION GP-DIRECT DRIVE 2949816 - Caterpillar

Table 1
Part Number Description Qty
0S-1615 Bolt 2
4F-7391 O-Ring Seal 1
7L-6580 O-Ring Seal 2
8T-9588 O-Ring Seal 1
9N-5085 Clamp 3
118-7214 O-Ring Seal 2
324-9290 Bellows As 1
344-2636 Clamp As 4
436-9149 Clean Gas Induction Cooler Gp 1
442-7347 Elbow 1
445-6881 Hose 1
450-2351 Band Clamp 2
485-2521 Water Tube As 1
485-2522 Water Tube As 1 This change is effective for the serial numbers listed in Table 2.
Table 2
Effective Serial Numbers
S/N:LDN01632-UP
S/N:LWR00111-UP
S/N:MG200156-UP
S/N:N5F00803-UP
S/N:T4A00898-UP
S/N:X5M00511-UP
S/N:BDN02272-UP
S/N:BE200151-UP
S/N:N8F00621-UP
S/N:PCF00120-UP
S/N:PDC00002-UP
S/N:X5F00002-UP
S/N:ZPS00247-UP Refer to Special Instruction, REHS7798, "Procedure for Removing and Installing the Exhaust Cooler (NRS) on All Tier 4 C15 and C18 Engines" for additional information.Note: A new 324-9290 Bellows As and two new 9N-5085 Clamp will be installed on the exhaust inlet side of the NRS cooler. A new 9N-5085 Clamp will be installed on the exhaust outlet side of the NRS cooler.
Illustration 1 g06009096
(1) 436-9149 Cooler As
(2) 344-2636 Clamp As
Illustration 2 g06009067
(3) 7L-6580 O-Ring Seal
(4) 485-2521 Water Tube As
(5) 450-2351 Band Clamp
(6) 118-7214 O-Ring Seal
(7) 485-2522 Water Tube As
(8) 445-6881 Hose
(9) 4F-7391 O-Ring Seal
Illustration 3 g06009092
(6) 118-7214 O-Ring Seal
(10) 8T-9588 O-Ring Seal
(11) 442-7347 Elbow