TRANSMISSION GP-DIRECT DRIVE 3590395 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-7600 Slide Hammer Puller 1 Start By:
Remove the crankshaft vibration damper and pulley. Refer to Disassembly and Assembly, "Vibration Damper and Pulley - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01221272
Remove bolts (1) and adapter (2).
Illustration 2 g01221276
Use Tooling (A) or a punch and hammer in order to puncture three or more holes in crankshaft front seal (4).
Use Tooling (A) to remove crankshaft front seal (4).
If necessary, use Tooling (A) or a punch and hammer in order to puncture three or more holes in crankshaft wear sleeve (3). Use Tooling (A) to remove crankshaft wear sleeve (3).