TRANSMISSION AR 3782120 - Caterpillar

Select option "3" in order to access the "System Menu".
Table 2
                   
        SYSTEM MENU        
    1:     SHOW MACHINE STAT
       
    2:     TEST DISPLAY            
    3:     AUTOLUBE MENU            
    4:     ATTACHMENT OPTIONS        
               
               
In the "System Menu", select option "3" for the "Autolube Menu".
Table 3
                   
        AUTOLUBE MENU            
    1:     ADJUST CYCLE TIME            
    2:     ADJUST LUBE TIME        
               
               
               
               "Adjust Cycle Time" - Select this option in order to determine the lubrication interval.Note: The minimum interval is 30 minutes and the maximum interval can be 900 minutes."Adjust Lube Time" - Select this option in order to determine the duration of time that the points on the machine will be lubricated.Note: The continual operating time of the pump can be between 2 minutes and 40 minutes.Note: The "lube time" is set at the factory to eight minutes. The "cycle time" is set at the factory to one hour. These settings should be adjusted according to the working conditions.Note: An optimum amount of grease keeps out mud, sand and water from the linkages.Adding Grease on Demand
When it is necessary to add grease on demand follow Step 1 through Step 4:
Illustration 4 g00572243
Push the key for the main menu.
Table 4
                   
        MAIN MENU        
    1:     PREFERENCES MENU        
    2:     EVENT MENU        
    3:     SYSTEM MENU            
    4:     SERVICE OPTIONS            
    5:     PERFORMANCE MENU        
               
Select option "4" in order to access the menu for "Service Options".
Table 5
                   
        SERVICE OPTIONS            
    1:     START MANUAL LUBE            
    2:     PERFORM CALIBRATION        
               
               
               
               
Select option "1" from "Service Options".
Press the OK key in order to bypass the autolube system and grease on demand.Note: If the pump for the automatic lubrication system fails, the linkages can be manually lubricated by using a grease gun. For information on the locations of the grease fittings, refer to Operation and