TRANSMISSION FILTER 6V2219 - Caterpillar

"Operator Configuration Screen"
Illustration 1 g00804334
(1) Caterpillar icon (2) Engine overview (3) Active alarms (4) Air system (5) Fuel system (6) Cooling water system (7) Lube oil system (8) Generator system (9) Exhaust ports (10) PLC StatusTouch the Caterpillar (1) icon in order to enter the "operator configuration screen". Touch the display for the password in order to enter the password. The default password is "1700". When the correct password is entered, the "engineering configuration screen" will be displayed automatically. The function of the navigation buttons is given in illustration 1."Engineering Configuration Screen"
The "engineering configuration screen" allows access to the following configuration screens:
"Modbus configuration screen"
"Panelview configuration screen"
"Clear Panelview alarm list screen"Refer to System Operation, "Display" for more information on the screens.The password can be changed from the screen. Touch the display for the password in order to modify the password."PLC Status Screen"
The following information is available from the "PLC status screen":
PLC scan time
PLC fault code
Scanner fault indicator
Chassis module faults"Modbus Configuration Screen"
Illustration 2 g00750140
The "modbus configuration screen" is used in order to change the port settings. The screen is an feature that is optional. Modify the settings of the port and press the save button in order to update the modbus communications. The following items are displayed on the screen:
"Address Port 1"
"RTS Off Delay"
"RTS TC TXD Delay"
"BAUD"
"Parity"
"Stop Bits"