TRANSMISSION AR 6Y3197 - Caterpillar

Removal Procedure
Illustration 1 g03432518
Shut down the engine, relieve the oil pressure, and remove the oil line assembly (8) from the accumulator.
Illustration 2 g03432671
Remove bolt (13), washer (14), spacer (15), and bar (16). Then swing strap (17) to the side.
Illustration 3 g03432577
Remove bolts (9) with hard washer (10) from plate (11) .
Illustration 4 g03432678
Remove turbocharger accumulator group (18) .
Illustration 5 g03432634
Remove bolts (5) with hard washers (12) in order to remove plate (11) .
Illustration 6 g03432694
Remove bracket assembly (22) by removing bolts (19), hard washers (20), and nuts (21) .
Illustration 7 g03432726
Remove bolts (3), (4) with washers (7) and full nuts (6) to remove supports (22) .Installation Procedure
Illustration 8 g03432783
Illustration 9 g03433296
Attach plate (1) to the engine using four bolts (3), (4) with eight washers (7) and eight full nuts (6). Run the bolts on the bottom of plate (1) through block (2) and bracket assembly (22) as shown in Illustration 8
Illustration 10 g03433030
Install plate (11) using three bolts (5) with three washers (7) .
Illustration 11 g03432694
Install bracket assembly (22) by using two bolts (19), two hard washers (20), and two nuts (21) .
Illustration 12 g03433696
Install the turbocharger accumulator group (18) to plate (11) using three bolts (9) and three washers (10) .
Illustration 13 g03432671
Install strap (17) using bolt (13), washer (14), spacer (15), and bar (16) .
Illustration 14 g03432518
Install oil hose (8) from the bottom of the turbocharger accumulator group to the oil supply manifold.