TRANSMISSION OIL LINES GROUP 7D4810 - Caterpillar

Engine Identification
Caterpillar dealers need the information from the serial number plate and from the information plate in order to determine the components that were included with the engine. This permits accurate identification of replacement part numbers.Serial Number Plate
Illustration 1 g01659053The serial number plate is on the left side of the cylinder block near the rear of the engine.The following information is stamped on the serial number plate: engine serial number, model and arrangement number.Information Plate
Illustration 2 g01659054The information plate is on the left side top surface of the cylinder block in front of the front cylinder head.The following information is stamped on the information plate: maximum altitude of the engine, horsepower, high idle, full load rpm, fuel settings and other information.Identification of the Generator Set
Illustration 3 g01658114The identification plate for the generator set is located on the right side of the barrel of the generator.When service is required, the information that is given on this plate should be used. The identification plate for the generator set includes the following information: serial number, model number and the rating of the generator set. The generator set consists of the engine and the generator. All pertinent generator data is also included on the plate in order to provide the information that is necessary to order parts.Serial Number Plate for the Generator
Illustration 4 g01658133The serial number for the generator is located on the left side of the front of the generator.Output Lead Wiring
All generator lead wiring information can be found on a decal that is located on the side panel of the generator's terminal box. If the generator is equipped with a circuit breaker, the decal may be found on the sheet metal of the circuit breaker panel.European Union
Illustration 5 g01880193This plate is positioned on the bottom left side of the plate for the PIN.Note: The CE plate is on machines that are certified to the European Union requirements that were effective at that time.For machines that are compliant to 2006/42/EC, the following information is stamped onto the CE plate. For quick reference, record this information in the spaces that are provided below.
Engine Power for Primary Engine (kW)____________________
Engine Power for Additional Engine (If Equipped) ____________________
Typical Machine Operating Weight for European Market (kg)____________________
Year of Construction____________________
Machine Type ____________________
Illustration 6 g01120192This plate is positioned on the bottom left side of the plate for the PIN.Note: The CE plate is on machines that are certified to the European Union requirements that were effective at that time.For machines that are compliant to 1998/42/EC, the following information is stamped onto the CE plate. For quick reference, record this information in the spaces that are provided below.
Engine Power for Primary Engine (kW)____________________
Typical Machine Operating Weight for European Market (kg)____________________
Year____________________For the name and the address of the manufacturer, and the country of origin of the machine, refer to the PIN plate.For the name, the address and the country of origin of the manufacturer, see the PIN plate.