TRANSMISSION AR-POWER SHIFT 7G4851 - Caterpillar

(3ZS, 9RS),
972G (7LS, 1EW) Wheel LoadersReference: Service Manual Module, RENR2148-01, Testing and Adjusting, 966G and 972G Wheel Loader, Electro-Hydraulic System; pages 65 and 67. This module is found in Service Manual, RENR2100, 966G and 972G Wheel Loader, Volume II.Illustrations 50 and 51, on pages 65 and 67, are shown with incorrect connections to the implement ECM. The H709-BU-18 wire should be connected to the number 22 pin of the J1 connector. The H708-OR-18 wire should be connected to the number 21 pin of the J1 connector. The wires are properly connected to the kickout set switch in both of the illustrations.