7S4629 TRANSMISSION PUMP GROUP Caterpillar parts
950
Rating:
Alternative (cross code) number:
CA7S4629
7S-4629
7S4629
CA7S4629
7S-4629
7S4629
Weight: 40 pounds 18 kg.
WHEEL LOADER,
Related part:
7S4629
PUMP-GEAR-YM
2260158
CL
You can buy:
US$492.04
14 Jul 2025
FridayParts
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Hydraulic Transmission Pump wkomngga Suitable for Caterpillar CAT Engine 3304 7S4629 7S-4629
wkomngga Item Name:Hydraulic Transmission Pump || Item Number:7S4629 7S-4629 || Application:Suitable for Caterpillar CAT Engine 3304 || Note: Please confirm the OE number and pictures match your requirements before purchasin || Friendly tips:This product boasts excellent performance, superior quality, reliability and safety. It is your reliable choice.
wkomngga Item Name:Hydraulic Transmission Pump || Item Number:7S4629 7S-4629 || Application:Suitable for Caterpillar CAT Engine 3304 || Note: Please confirm the OE number and pictures match your requirements before purchasin || Friendly tips:This product boasts excellent performance, superior quality, reliability and safety. It is your reliable choice.
new Hydraulic Transmission Pump Suitable for Caterpillar CAT Engine TuneCrumph 3304 7S4629 7S-4629
TuneCrumph Item Name:Hydraulic Transmission Pump || Item Number:7S4629 7S-4629 || Application:for Caterpillar CAT Engine 3304 || Attention: Dear buyers, precise matching of auto parts is the prerequisite for safe installation! To avoid the problems such as returns, exchanges or installation hazards caused by incorrect model selection, please carefully read and verify the model before placing your order. Thank you for your support! || NOTE:We are fully aware that your satisfaction is the driving force for the growth of our brand. Thank you for giving us the opportunity to serve you. If there is anything we haven't covered, please give us your feedback directly. Your suggestions are extremely precious to us!
TuneCrumph Item Name:Hydraulic Transmission Pump || Item Number:7S4629 7S-4629 || Application:for Caterpillar CAT Engine 3304 || Attention: Dear buyers, precise matching of auto parts is the prerequisite for safe installation! To avoid the problems such as returns, exchanges or installation hazards caused by incorrect model selection, please carefully read and verify the model before placing your order. Thank you for your support! || NOTE:We are fully aware that your satisfaction is the driving force for the growth of our brand. Thank you for giving us the opportunity to serve you. If there is anything we haven't covered, please give us your feedback directly. Your suggestions are extremely precious to us!
Hydraulic Transmission Pump 7S4629 7S-4629 Fits for Caterpillar Engine 3304
Goruvhe ☝Part Name☝:Hydraulic Transmission Pump || ☝Part Number☝:7S4629 7S-4629 || ☝Application☝:Fits for Caterpillar Engine 3304 || NOTE： To avoid unavoidable returns! Before purchasing, please compare with the old parts and part numbers to verify their accuracy before making a purchase. || Tips: The product images are for reference only. If you find any discrepancies with your actual product, please contact us promptly and we will respond as soon as possible!
Goruvhe ☝Part Name☝:Hydraulic Transmission Pump || ☝Part Number☝:7S4629 7S-4629 || ☝Application☝:Fits for Caterpillar Engine 3304 || NOTE： To avoid unavoidable returns! Before purchasing, please compare with the old parts and part numbers to verify their accuracy before making a purchase. || Tips: The product images are for reference only. If you find any discrepancies with your actual product, please contact us promptly and we will respond as soon as possible!
Number on catalog scheme:
2
For full view, you need register
Compatible equipment models: 7S4629:
Information:
Face Runout (axial eccentricity) of the flywheel:
CHECKING FACE RUNOUT OF THE FLYWHEEL1. Install the dial indicator as shown. Put a force on the flywheel toward the rear.2. Set the dial indicator to read 0.0 mm (.000 in.)3. Turn the flywheel and read the indicator every 90°. Put a force on the flywheel to the rear before each reading.4. The difference between the lower and higher measurements taken at all four points must not be more than 0.15 mm (.006 in.) which is the maximum permissible face runout (axial eccentricity of the flywheel).Bore Runout (radial eccentricity) of the Flywheel:
CHECKING FLYWHEEL BORE1. Install the dial indicator (3) and make an adjustment of the universal attachment (4) so it makes contact as shown.2. Set the dial indicator to read 0.0 mm (.00 in.)3. Turn the flywheel and read the indicator every 90°.4. The difference between the lower and higher measurements taken at all four points must not be more than 0.15 mm (.006 in.), which is the maximum permissible bore runout (radial eccentricity) of the flywheel.
CHECKING FLYWHEEL CLUTCH PILOT BEARING BORE5. Runout (eccentricity) of the bore for the pilot bearing for the flywheel clutch, must not exceed 0.13 mm (.005 in.).
CHECKING FACE RUNOUT OF THE FLYWHEEL1. Install the dial indicator as shown. Put a force on the flywheel toward the rear.2. Set the dial indicator to read 0.0 mm (.000 in.)3. Turn the flywheel and read the indicator every 90°. Put a force on the flywheel to the rear before each reading.4. The difference between the lower and higher measurements taken at all four points must not be more than 0.15 mm (.006 in.) which is the maximum permissible face runout (axial eccentricity of the flywheel).Bore Runout (radial eccentricity) of the Flywheel:
CHECKING FLYWHEEL BORE1. Install the dial indicator (3) and make an adjustment of the universal attachment (4) so it makes contact as shown.2. Set the dial indicator to read 0.0 mm (.00 in.)3. Turn the flywheel and read the indicator every 90°.4. The difference between the lower and higher measurements taken at all four points must not be more than 0.15 mm (.006 in.), which is the maximum permissible bore runout (radial eccentricity) of the flywheel.
CHECKING FLYWHEEL CLUTCH PILOT BEARING BORE5. Runout (eccentricity) of the bore for the pilot bearing for the flywheel clutch, must not exceed 0.13 mm (.005 in.).
Caterpillar SIS machinery equipment:
Caterpillar SIS
950 WHEEL LOADER 43J06268-UP (MACHINE) POWERED BY 3304 ENGINE »
7S-4629
TRANSMISSION PUMP GROUP
950 WHEEL LOADER 31K01486-UP (MACHINE) POWERED BY 3304 ENGINE »
7S-4629
TRANSMISSION PUMP GROUP
950 WHEEL LOADER 31K00001-00942 (MACHINE) »
7S-4629
TRANSMISSION PUMP GROUP
950 TREE HARVESTER 49U00001-00237 (MACHINE) »
7S-4629
TRANSMISSION PUMP GROUP
950 WHEEL LOADER 31K01201-01485 (MACHINE) »
7S-4629
TRANSMISSION PUMP GROUP
950 TREE HARVESTER 49U00238-UP (MACHINE) »
7S-4629
TRANSMISSION PUMP GROUP
950 WHEEL LOADER 31K00943-01200 (MACHINE) »
7S-4629
TRANSMISSION PUMP GROUP
950 WHEEL LOADER 43J00001-04063 (MACHINE) »
7S-4629
TRANSMISSION PUMP GROUP
950 WHEEL LOADER 43J04064-06267 (MACHINE) »
7S-4629
TRANSMISSION PUMP GROUP
950 WHEEL LOADER 73J03957-07257 (MACHINE) »
7S-4629
TRANSMISSION PUMP GROUP
950 WHEEL LOADER 73J07258-UP (MACHINE) POWERED BY 3304 ENGINE »
7S-4629
TRANSMISSION PUMP GROUP
Caterpillar parts catalog:
Parts transmission Caterpillar catalog:
9S1059
TRANSMISSION OVERHAUL
950, 951B
950, 951B
6L2668
TRANSMISSION AND STARTER PINION GROUP
D379, D398, G379, G398
D379, D398, G379, G398
3N4548
TRANSMISSION GP-MARINE
D342, D342C, D343
D342, D342C, D343
3N4545
TRANSMISSION GP-MARINE
D342, D342C, D343
D342, D342C, D343
6Y8245
TRANSMISSION AR
938F, 938G, IT38F, IT38G
938F, 938G, IT38F, IT38G
3P7645
TRANSMISSION
D6C, D6D
D6C, D6D