8T9506 TRANSMISSION PUMP Caterpillar parts
D5H, D5HTSK II
Rating:
Alternative (cross code) number:
CA8T9506
8T-9506
8T9506
CA8T9506
8T-9506
8T9506
Weight: 0.15 pounds 0 kg.
TRACK SKIDDER, TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$19.01
30 Mar 2019
CATERPILLAR AFTERMARKET: CATERPILLAR AFT
CATERPILLAR KIT GASKET 8T9506 NEW
$12.02
28 Mar 2018
26 Hundredths Pounds
CTP: CTP
8T9506 Kit Gasket Fits Caterpillar D5HTSK II 5A 5P 5S 5 D5H 55
Warranty
Warranty
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-7409 Eyebolt 1 Start By:
Remove the turbocharger. Refer to Disassembly and Assembly, "Turbocharger - Remove".
Remove the starting motor. Refer to Disassembly and Assembly, "Air Starting Motor - Remove".
Remove the barring group. Refer to Disassembly and Assembly, "Barring Group - Remove and Install".
Remove the camshaft drive gear. Refer to Disassembly and Assembly, "Camshaft Drive Gear - Remove".
Remove the crankshaft rear seal. Refer to Disassembly and Assembly, "Crankshaft Rear Seal - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Refer to Disassembly and Assembly, "General Information (Reference Material)" for more information.
Remove the bolts that hold the engine oil pan to the rear housing.
Illustration 1 g01296983
Attach Tooling (A) and a suitable lifting device to the top of rear housing (2). The weight of rear housing (2) is approximately 210 kg (465 lb).Note: Ensure that all the bolts have been removed from the inside and the outside of the rear housing before you remove the rear housing.
Remove bolts (1) that hold rear housing (2) to the cylinder block. Carefully move rear housing (2) away from the cylinder block.
Remove the gasket and the O-ring seals from the cylinder block.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-7409 Eyebolt 1 Start By:
Remove the turbocharger. Refer to Disassembly and Assembly, "Turbocharger - Remove".
Remove the starting motor. Refer to Disassembly and Assembly, "Air Starting Motor - Remove".
Remove the barring group. Refer to Disassembly and Assembly, "Barring Group - Remove and Install".
Remove the camshaft drive gear. Refer to Disassembly and Assembly, "Camshaft Drive Gear - Remove".
Remove the crankshaft rear seal. Refer to Disassembly and Assembly, "Crankshaft Rear Seal - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Refer to Disassembly and Assembly, "General Information (Reference Material)" for more information.
Remove the bolts that hold the engine oil pan to the rear housing.
Illustration 1 g01296983
Attach Tooling (A) and a suitable lifting device to the top of rear housing (2). The weight of rear housing (2) is approximately 210 kg (465 lb).Note: Ensure that all the bolts have been removed from the inside and the outside of the rear housing before you remove the rear housing.
Remove bolts (1) that hold rear housing (2) to the cylinder block. Carefully move rear housing (2) away from the cylinder block.
Remove the gasket and the O-ring seals from the cylinder block.
Caterpillar parts catalog:
Parts transmission Caterpillar catalog:
D5H, D5H XL, D5HTSK II
3T8274
TRANSMISSION AR-POWER SHIFT
D5H, D5HTSK II
D5H, D5HTSK II
D4H, D4HTSK II, D5H, D5HTSK II
D4H, D4HTSK II, D5H, D5HTSK II
943, 953, 953B
943, 953, 953B
D6C, D6D
977K
5P4864
TRANSMISSION OIL SYSTEM
571G, 572G
571G, 572G
5P4862
TRANSMISSION
571G, 572G
571G, 572G
D11N, D6H, D7H, D8N