TRANSMISSION AR 9P9640 - Caterpillar

9P9640 TRANSMISSION AR Caterpillar parts 910, G910, IT12

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA9P9640
9P-9640
9P9640

Weight: 1052 pounds 477 kg.

Buy TRANSMISSION AR 9P9640 Caterpillar genuine, new aftermarket tractor parts with delivery
COMPACT WHEEL LOADER, WHEEL LOADER,

This part in 1 request: Show. This information for suppliers only!

#38937 9P9640

2017-01-08

Compatible equipment models: 9P9640:

COMPACT WHEEL LOADER 910

INTEGRATED TOOLCARRIER IT12

WHEEL LOADER G910 Caterpillar

Number on catalog scheme:

Caterpillar 9P9640 Parts scheme TRANSMISSION AR

For full view, you need register

Information:

Illustration 1 g00636501
Install wiper motor (21) in position. Secure wiper motor (21) to wiper motor assembly (17) with three bolts (22) .
Illustration 2 g00636494
Install arm (20) on the shaft of window wiper motor (21). Tighten bolt (19). Bolt (19) will secure arm (20) to the shaft of window wiper motor (21) .
Illustration 3 g00636351
Install wiper motor assembly (17) in position inside the cab of the machine. Secure wiper motor assembly (17) with two bolts (18) .
Illustration 4 g00636484
Connect electrical connector (16) .
Illustration 5 g00636319
Install cover (13) in position.
Secure cover (13) with two Torx screws (15) on the side of cover (13) .
Illustration 6 g00636312
Secure cover (13) with Torx screw (14) on the side of cover (13) .
Illustration 7 g00636310
Secure cover (13) with four Torx screws (12) on the front of cover (13) .
Illustration 8 g00636300
Install filter (11) in position. Secure filter (11) with two screws (10)
Illustration 9 g00636295
Install nut (9) on shaft (7) .
Illustration 10 g00636285
Install cover (8) on shaft (7) .
Illustration 11 g00636932
Be sure to push wiper arm head straight onto the wiper motor shaft. If wiper arm head is not installed straight the splines will not be formed properly when the nut is torqued.
Install wiper arm (3) on shaft (7). Position wiper arm (3) at 0° to 2 ° from the vertical centerline.
Install nut (5) and the washer on shaft (7). Hand tighten nut (5) on shaft (7) .
Torque nut (5 ) to 24 1 N m (17 0.7 lb ft).
Wait at least one hour. Torque nut (5) again to 24 1 N m (17 0.7 lb ft). Do not wait more than 4 hours.
Lower cover (4) on wiper arm (3) .
Illustration 12 g00488225
Install hose (6) on wiper arm (3) .Note: Do not use petroleum lubricants on the hose ends. Do not stretch the hose between connections.
Connect the hose of the window washer to the fitting. Install the hose to Dimension (A). Dimension (A) is 1.0 1.0 mm (0.04 0.04 inch).
Illustration 13 g00744287
Install grill (2). Secure grill (2) with six bolts (1) .
Connect the battery terminals. Move the battery disconnect switch to the ON position.
Start the machine.
Start the window wiper. Check the wiper arm for proper operation.