TRANSMISSION GP 9U9495 - Caterpillar

Illustration 1 g06236891
Typical example
Table 1
Item Qty Part Specification Description
The crankshaft seal group cannot be used once the seal has been separated from the wear sleeve.
Make sure that the correct crankshaft seal group is installed on each end of the crankshaft.
3 1 113-8433 Crankshaft Seal Gp Install the crankshaft seal group in the flywheel housing group (1) on standard rotation engine.
Install the crankshaft seal group in the front housing group (2) on reverse rotation engine.
4 1 113-8432 Crankshaft Seal Gp Install the crankshaft seal group in the flywheel housing group (1) on reverse rotation engine.
Install the crankshaft seal group in the front housing group (2) on standard rotation engine.
- - - The wear sleeve is installed from both ends of the crankshaft at the distance of 0.5 0.5 mm (0.02 0.02 inch).
The crankshaft seal is installed from both ends of the crankshaft at the distance of 8.0 0.5 mm (0.31 0.02 inch).