TRANSMISSION AR 9W5126 - Caterpillar

9W5126 TRANSMISSION AR Caterpillar parts 120H, 135H, 135H NA, 160H, 160H ES, 160H NA

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA9W5126
9W-5126
9W5126

Weight: 1845 pounds 836 kg.

Buy TRANSMISSION AR 9W5126 Caterpillar genuine, new aftermarket tractor parts with delivery
MOTOR GRADER,

This part in 1 request: Show. This information for suppliers only!

#650857 9W5126

2021-05-13

Compatible equipment models: 9W5126:

MOTOR GRADER 120H 135H 135H NA 160H 160H ES 160H NA Caterpillar

Number on catalog scheme:

Caterpillar 9W5126 Parts scheme TRANSMISSION AR

For full view, you need register

Information:

TYPE="LEVEL" DEPTH="1" @@@-->Removal Procedure
Start By:
Remove the cover for the V-belts. Refer to Disassembly and Assembly, "V-Belt - Remove and Install".
Remove the expansion tank. Refer to Disassembly and Assembly, "Expansion Tank - Remove and Install".
If necessary, remove the alternator. Refer to Disassembly and Assembly, "Alternator - Remove".
If necessary, remove the fan. Refer to Disassembly and Assembly, "Fan - Remove and Install".
Remove the front pulley. Refer to Disassembly and Assembly, "Vibration Damper and Pulley - Remove".
Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove".
Remove the auxiliary water pump. Refer to Disassembly and Assembly, "Auxiliary Water Pump - Remove".
Drain the coolant into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Drain" for the correct procedure.
Remove the timing gears. Refer to Disassembly and Assembly, "Gear Group (Front) - Remove and Install".
Remove the fuel injection pump. Refer to Disassembly and Assembly, "Fuel Injection Pump - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01337982
Remove bolts (1) that secure bypass tube (2) to front housing (3). Remove bypass tube (2) from the cylinder head. Remove O-ring (4) and O-ring (5) from bypass tube (2).
Illustration 2 g01337985
Remove bolts (7), bolts (8) and bolts (9) from front housing (3). Note: The bolts are three different lengths. Note the positions of the different bolts.
Remove front housing (3) from the cylinder block.
Remove gasket (6).
Illustration 3 g01337987
Remove thrust washer (10) from the cylinder block.