TRAVEL DRIVE 0995351 - Caterpillar

Removal Procedure
Start By:
Remove the camshaft. Manual Removal
Table 1
Required Tools
Tool Part Number Part Description Qty
A 125-2739 Bearing Pilot 1
125-2740 Backup Plate 1
125-2741 Bearing Sleeve 1
B 6V-4013 Screw 1
6V-4010 Puller Plate 1
8M-8778 Taperlock Stud 1
2J-3506 Full Nut 1
5P-8248 Hard Washer 1
Illustration 1 g01203149
205
Install the sleeve of Tooling (A) into camshaft bearing (1). Install the remainder of Tooling (A).
Illustration 2 g01203308
Install Tooling (B). Remove camshaft bearing (1). Hydraulic Removal
Table 2
Required Tools
Tool Part Number Part Description Qty
A 125-2739 Bearing Pilot 1
125-2740 Backup Plate 1
125-2741 Bearing Sleeve 1
B 6V-4013 Screw 1
6V-4010 Puller Plate 1
8M-8778 Taperlock Stud 1
2J-3506 Full Nut 1
5P-8248 Hard Washer 1
C 316-1493 Hydraulic Puller 1
350-7768 Electric Hydraulic Pump Gp (115 V) 1
350-7769 Electric Hydraulic Pump Gp (230 V) 1
When you are using hydraulic cylinders and puller studs, always ensure that the rated capacity of the puller stud meets or exceeds the rated capacity of the hydraulic cylinder. If the puller stud does not meet or exceed the rated capacity of the hydraulic cylinder, a sudden failure of the puller stud could occur. The sudden failure of the puller stud could result in personal injury or death.
Illustration 3 g01203149
Install the sleeve of Tooling (A) into camshaft bearing (1). Install the remainder of Tooling (A).
Illustration 4 g01203225
Install Tooling (B) and Tooling (C). Remove camshaft bearing (1). Installation Procedure