TRAY-CABLE 5361754 - Caterpillar

Table 1
Required Tools
Tool Part Number Description Qty
A 138-7575 Link Bracket 4
Personal injury or death can result from lifting a heavy assembly.The heavy assembly can fall if using an incorrect hoist to lift the load.Be sure the hoist has the correct capacity to lift a heavy assembly. Approximate weight of the assembly is given below.
Illustration 1 g00628264Note: The cab weighs 500 kg (1100 lb).
Attach tool (A) and a suitable lifting device to the cab. Position the cab on the machine. Note: Do not tighten the bolts that hold the cab in place until all the bolts are started.
Illustration 2 g00628261
Install twelve bolts (14) loosely.
Illustration 3 g00628246
Install three bolts (6) loosely. Connect electrical connector (5).
Tighten twelve bolts (14) and three bolts (6). Install the plugs that cover bolts (14).
Connect electrical connector (12) and hose (13).
Illustration 4 g00628250
Install two bolts (10) and install cover (9).
Illustration 5 g00628248
Install three bolts (8) and ashtray (7).
Illustration 6 g00628245
Install cover (2) and install two bolts (1).
Install dash (3 ) and install two bolts (4). End By:
Install the rollover protective structure (ROPS). See the procedure in Disassembly and Assembly, "Rollover Protective Structure (ROPS) - Remove and Install" in this module.