TRAY A 9F0340 - Caterpillar

Installation Procedure
Note: Verify that all of the components of the lubrication pump are clean and free of foreign material prior to installation.Note: Check all of the O-ring seals and the components for wear or damage. Replace the components, if necessary. Lubricate the O-ring seals lightly with the lubricant that is being sealed.
Illustration 1 g01432636
Attach a suitable lifting device to lubrication pump (14). The weight of the lubrication pump is approximately 29 kg (64 lb). Position lubrication pump (14) to the platform. Install bolts (15) that secure lubrication pump (14) to the platform.
Illustration 2 g01432601
Connect hose assembly (11) to solenoid valve (12). Install clip (13) .
Illustration 3 g01432595
Install clip (11). Install bolt (9) and angle (10) to the lubrication pump. Connect tee fitting.
Illustration 4 g01432586
Connect hose assembly (6). Install tube assembly (5). Install clips (3) and (4) to tube assembly (5) .
Illustration 5 g01432570
Connect harness assemblies (1) and (2) .