2R0696 TREADLE ASSEM. Caterpillar parts
920, 930, 950
Rating:
Alternative (cross code) number:
CA2R0696
2R-0696
2R0696
CA2R0696
2R-0696
2R0696
Weight: 1 pounds 0 kg.
WHEEL LOADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Replacement for fits 2R0696 Treadle A Fits Caterpillar Models
ZEHYDDM
ZEHYDDM
Replacement For Compatible With 2R0696 Treadle A Fits Caterpillar Models
YALIYA
YALIYA
Number on catalog scheme:
3
For full view, you need register
Information:
Remove & Install Valves
Start By:a. remove cylinder head assembly 1. Position the cylinder head assembly on its side as shown.2. Use Tooling (A) and compress valve springs (3). Remove retainer locks (1). Remove Tooling (A), rotocoil assembly (2) and springs (3). Repeat the procedure; then remove springs (5) and base (6). Remove valve (4).3. Repeat Step 2 for the remainder of the valves. The following steps are for the installation of the valves. 4. Lubricate valves (4) with clean engine oil. Install the valves in cylinder head.
The retainer locks can be thrown from the valve when the spring compressor is released if they are not in their correct position on the valve stem. To prevent possible personal injury, keep away from the front of the valve retainer locks and valve springs during installation of the valves.
A small amount of grease can be used to hold the retainer locks in position during installation.5. Position base (6), valve springs (3) and rotocoil (2) on the valve stem. Use Tooling (A) and compress valve springs (3); then install retainer locks (1).6. Repeat Step 5 to install the remainder of valves (4).End By:a. install cylinder head assembly
Start By:a. remove cylinder head assembly 1. Position the cylinder head assembly on its side as shown.2. Use Tooling (A) and compress valve springs (3). Remove retainer locks (1). Remove Tooling (A), rotocoil assembly (2) and springs (3). Repeat the procedure; then remove springs (5) and base (6). Remove valve (4).3. Repeat Step 2 for the remainder of the valves. The following steps are for the installation of the valves. 4. Lubricate valves (4) with clean engine oil. Install the valves in cylinder head.
The retainer locks can be thrown from the valve when the spring compressor is released if they are not in their correct position on the valve stem. To prevent possible personal injury, keep away from the front of the valve retainer locks and valve springs during installation of the valves.
A small amount of grease can be used to hold the retainer locks in position during installation.5. Position base (6), valve springs (3) and rotocoil (2) on the valve stem. Use Tooling (A) and compress valve springs (3); then install retainer locks (1).6. Repeat Step 5 to install the remainder of valves (4).End By:a. install cylinder head assembly
Cat SIS web machinery list:
Parts treadle Caterpillar catalog:
5D3633
TREADLE ASSEM.
769, D9G
769, D9G
8V8222
TREADLE AS-RH
215D, 227, 229, 235B, 235C, 245, 350 L, 5080
215D, 227, 229, 235B, 235C, 245, 350 L, 5080
8V8223
TREADLE AS-LH
215D, 227, 229, 235B, 235C, 245, 350 L, 5080
215D, 227, 229, 235B, 235C, 245, 350 L, 5080
215, 225, 227, 235, 245
9M4117
TREADLE
824, 824B, 826B, 834, 988, 992
824, 824B, 826B, 834, 988, 992
1V9523
TREADLE
988B, 992C
988B, 992C
936F, 950F II, 966F II, 970F
815B, 826C, 926, 936F, 950F, 950F II, 980C, 980F, RM-250C, RR-250B
950B, 950F, 950F II, 966D, 966F, 966F II, 970F